From: "Mark A. Greer" <mgreer@mvista.com>
To: linuxppc-dev <linuxppc-dev@lists.linuxppc.org>
Subject: linuxppc_2_4_devel Spruce KGDB patch
Date: Fri, 07 Feb 2003 18:23:08 -0700 [thread overview]
Message-ID: <3E445BFC.8010500@mvista.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 80 bytes --]
If no one objects to this patch, would a power that be please push it.
Mark
--
[-- Attachment #2: spruce.patch --]
[-- Type: text/plain, Size: 10031 bytes --]
===== arch/ppc/config.in 1.165 vs edited =====
--- 1.165/arch/ppc/config.in Sat Feb 1 13:04:41 2003
+++ edited/arch/ppc/config.in Fri Feb 7 15:25:27 2003
@@ -225,6 +225,11 @@
define_bool CONFIG_EPIC_SERIAL_MODE y
fi
+if [ "$CONFIG_SPRUCE" = "y" ]; then
+ define_bool CONFIG_GEN550_KGDB y
+ define_bool CONFIG_GEN550_PROGRESS y
+fi
+
if [ "$CONFIG_LOPEC" = "y" ]; then
define_bool CONFIG_EPIC_SERIAL_MODE y
define_bool CONFIG_GEN550_KGDB y
@@ -756,7 +761,8 @@
if [ "$CONFIG_MCPN765" = "y" -o "$CONFIG_SANDPOINT" = "y" \
-o "$CONFIG_ZX4500" = "y" -o "$CONFIG_PRPMC800" = "y" \
-o "$CONFIG_4xx" = "y" -o "$CONFIG_GT64260" = "y" \
- -o "$CONFIG_LOPEC" = "y" -o "$CONFIG_PPLUS" = "y" ]; then
+ -o "$CONFIG_LOPEC" = "y" -o "$CONFIG_PPLUS" = "y" \
+ -o "$CONFIG_SPRUCE" = "y" ]; then
bool 'Support for early boot texts over serial port' CONFIG_SERIAL_TEXT_DEBUG
fi
endmenu
===== arch/ppc/configs/spruce_defconfig 1.6 vs edited =====
--- 1.6/arch/ppc/configs/spruce_defconfig Tue Jan 7 03:52:51 2003
+++ edited/arch/ppc/configs/spruce_defconfig Fri Feb 7 16:29:57 2003
@@ -10,6 +10,7 @@
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
+# CONFIG_ADVANCED_OPTIONS is not set
#
# Loadable module support
@@ -24,17 +25,35 @@
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_6xx=y
-# CONFIG_4xx is not set
+# CONFIG_40x is not set
+# CONFIG_440 is not set
# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
+# CONFIG_PPC_ISERIES is not set
# CONFIG_8260 is not set
CONFIG_PPC_STD_MMU=y
# CONFIG_ALL_PPC is not set
# CONFIG_APUS is not set
+# CONFIG_WILLOW is not set
+# CONFIG_PCORE is not set
+# CONFIG_POWERPMC250 is not set
+# CONFIG_EV64260 is not set
CONFIG_SPRUCE=y
+# CONFIG_MENF1 is not set
+# CONFIG_LOPEC is not set
+# CONFIG_MCPN765 is not set
+# CONFIG_MVME5100 is not set
+# CONFIG_PPLUS is not set
+# CONFIG_PRPMC750 is not set
+# CONFIG_PRPMC800 is not set
+# CONFIG_SANDPOINT is not set
+# CONFIG_ADIR is not set
+# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
+# CONFIG_ZX4500 is not set
+CONFIG_GEN550_KGDB=y
+CONFIG_GEN550_PROGRESS=y
# CONFIG_SMP is not set
# CONFIG_ALTIVEC is not set
# CONFIG_TAU is not set
@@ -179,11 +198,30 @@
# CONFIG_SCSI is not set
#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_BOOT is not set
+# CONFIG_FUSION_ISENSE is not set
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LAN is not set
+
+#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_I2O_PCI is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_LAN is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+
+#
# Network device support
#
CONFIG_NETDEVICES=y
@@ -218,6 +256,7 @@
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
+# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
@@ -369,6 +408,11 @@
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_IPMI_PANIC_EVENT is not set
+# CONFIG_IPMI_DEVICE_INTERFACE is not set
+# CONFIG_IPMI_KCS is not set
+# CONFIG_IPMI_WATCHDOG is not set
#
# Watchdog Cards
@@ -507,3 +551,4 @@
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
===== arch/ppc/kernel/gen550_dbg.c 1.3 vs edited =====
--- 1.3/arch/ppc/kernel/gen550_dbg.c Tue Jan 28 09:18:20 2003
+++ edited/arch/ppc/kernel/gen550_dbg.c Thu Feb 6 16:21:08 2003
@@ -56,7 +56,6 @@
unsigned long serial_init(int chan, void *ignored)
{
unsigned long com_port;
- unsigned char lcr, dlm;
/* We need to find out which type io we're expecting. If it's
* 'SERIAL_IO_PORT', we get an offset from the isa_io_base.
@@ -80,23 +79,14 @@
/* How far apart the registers are. */
shift = rs_table[chan].iomem_reg_shift;
- /* save the LCR */
- lcr = serial_inb(com_port + (UART_LCR << shift));
/* Access baud rate */
serial_outb(com_port + (UART_LCR << shift), 0x80);
- dlm = serial_inb(com_port + (UART_DLM << shift));
- /*
- * Test if serial port is unconfigured.
- * We assume that no-one uses less than 110 baud or
- * less than 7 bits per character these days.
- * -- paulus.
- */
/* Input clock. */
serial_outb(com_port + (UART_DLL << shift),
- (BASE_BAUD / SERIAL_BAUD) & 0xFF);
+ (rs_table[chan].baud_base / SERIAL_BAUD) & 0xFF);
serial_outb(com_port + (UART_DLM << shift),
- (BASE_BAUD / SERIAL_BAUD) >> 8);
+ (rs_table[chan].baud_base / SERIAL_BAUD) >> 8);
/* 8 data, 1 stop, no parity */
serial_outb(com_port + (UART_LCR << shift), 0x03);
/* RTS/DTR */
===== arch/ppc/platforms/spruce_setup.c 1.2 vs edited =====
--- 1.2/arch/ppc/platforms/spruce_setup.c Sat Feb 1 12:15:00 2003
+++ edited/arch/ppc/platforms/spruce_setup.c Fri Feb 7 16:30:55 2003
@@ -12,21 +12,6 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
@@ -73,6 +58,9 @@
extern unsigned char pckbd_sysrq_xlate[128];
extern char cmd_line[];
+extern void gen550_progress(char *, unsigned short);
+extern void gen550_init(int, struct serial_struct *);
+
/*
* CPC700 PIC interrupt programming table
*
@@ -128,6 +116,51 @@
return 0;
}
+#ifdef CONFIG_SERIAL
+static void __init
+spruce_early_serial_map(void)
+{
+ u32 baud_base;
+ struct serial_struct serial_req;
+
+ if (SPRUCE_UARTCLK_IS_33M(readb(SPRUCE_FPGA_REG_A)))
+ baud_base = SPRUCE_BAUD_33M;
+ else
+ baud_base = SPRUCE_BAUD_30M;
+
+ /* Setup serial port access */
+ memset(&serial_req, 0, sizeof(serial_req));
+ serial_req.baud_base = baud_base;
+ serial_req.line = 0;
+ serial_req.port = 0;
+ serial_req.irq = 3;
+ serial_req.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ serial_req.io_type = SERIAL_IO_MEM;
+ serial_req.iomem_base = (u_char *)UART0_IO_BASE;
+ serial_req.iomem_reg_shift = 0;
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ gen550_init(0, &serial_req);
+#endif
+
+ if (early_serial_setup(&serial_req) != 0)
+ printk("Early serial init of port 0 failed\n");
+
+ /* Assume early_serial_setup() doesn't modify serial_req */
+ serial_req.line = 1;
+ serial_req.port = 1;
+ serial_req.irq = 4;
+ serial_req.iomem_base = (u_char *)UART1_IO_BASE;
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ gen550_init(1, &serial_req);
+#endif
+
+ if (early_serial_setup(&serial_req) != 0)
+ printk("Early serial init of port 1 failed\n");
+}
+#endif
+
TODC_ALLOC();
static void __init
@@ -157,40 +190,7 @@
conswitchp = &dummy_con;
#endif
-#ifdef CONFIG_SERIAL
- {
- u32 baud_base;
- struct serial_struct serial_req;
-
- if (SPRUCE_UARTCLK_IS_33M(readb(SPRUCE_FPGA_REG_A)))
- baud_base = SPRUCE_BAUD_33M;
- else
- baud_base = SPRUCE_BAUD_30M;
-
- /* Setup serial port access */
- memset(&serial_req, 0, sizeof(serial_req));
- serial_req.baud_base = baud_base;
- serial_req.line = 0;
- serial_req.port = 0;
- serial_req.irq = 3;
- serial_req.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
- serial_req.io_type = SERIAL_IO_MEM;
- serial_req.iomem_base = UART0_IO_BASE;
- serial_req.iomem_reg_shift = 0;
-
- if (early_serial_setup(&serial_req) != 0)
- printk("Early serial init of port 0 failed\n");
-
- /* Assume early_serial_setup() doesn't modify serial_req */
- serial_req.line = 1;
- serial_req.port = 1;
- serial_req.irq = 4;
- serial_req.iomem_base = UART1_IO_BASE;
-
- if (early_serial_setup(&serial_req) != 0)
- printk("Early serial init of port 1 failed\n");
- }
-#endif
+ spruce_early_serial_map();
/* Identify the system */
printk("System Identification: IBM Spruce\n");
@@ -281,6 +281,31 @@
return (unsigned char)(kbd_data >> 24);
}
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+/*
+ * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
+ */
+static __inline__ void
+spruce_set_bat(void)
+{
+ unsigned long bat3u, bat3l;
+ static u_char first_time = 1;
+
+ if (first_time) {
+ __asm__ __volatile__(
+ " lis %0,0xf800\n \
+ ori %1,%0,0x002a\n \
+ ori %0,%0,0x0ffe\n \
+ mtspr 0x21e,%0\n \
+ mtspr 0x21f,%1\n \
+ isync\n \
+ sync "
+ : "=r" (bat3u), "=r" (bat3l));
+ first_time = 0;
+ }
+}
+#endif
+
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
@@ -309,6 +334,16 @@
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
+
+#if defined(CONFIG_SERIAL) && (defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB))
+ spruce_set_bat();
+ spruce_early_serial_map();
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+ ppc_md.progress = gen550_progress;
+#endif /* CONFIG_SERIAL_TEXT_DEBUG */
+ ppc_md.early_serial_map = spruce_early_serial_map;
+#endif
#ifdef CONFIG_VT
/* Spruce has a PS2 style keyboard */
reply other threads:[~2003-02-08 1:23 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E445BFC.8010500@mvista.com \
--to=mgreer@mvista.com \
--cc=linuxppc-dev@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).