* Kernel booting
@ 2003-02-19 3:05 Srini Amble
0 siblings, 0 replies; only message in thread
From: Srini Amble @ 2003-02-19 3:05 UTC (permalink / raw)
To: linuxppc-embedded
Dear All,
I have an MPC 850 board with PPCBoot on it. The console is on SMC2 and
is set for 9600 baud. I have built the kernel using ELDK 2.0.2. make
mrproper, make xconfig, make dep, and followed by make pImage were the
sequence of commands I used for generating the kernel. I have modified
some of the files in "include/asm-ppc" and "arch/ppc" directories to
account for board specificity. Using TFTP I download the kernel to the
target from my host. When I issue "bootm" command the boot loader
decompresses the kernel image and loads it into SDRAM. I see the message
"...Control is being turned over to Kernel..." and after that there is
no activity on the console. Would any kind soul have any suggestions as
to how I can proceed to debug the problem?
Thanks for all your help
Srini
P.S. If someone can list all the files that need to be modified to
account for a non-supported board then it will be much appreciated.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-02-19 3:05 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-02-19 3:05 Kernel booting Srini Amble
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).