From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3E631078.7040000@devcom.cz> Date: Mon, 03 Mar 2003 09:21:12 +0100 From: Jan Damborsky MIME-Version: 1.0 To: g.ramakrishna@exgate.tek.com Cc: linuxppc-dev@lists.linuxppc.org Subject: Re: X windows for Linux PPC embedded References: <301A812E6528D511A8F70008C71E578601D3402A@AP-BANG-M02> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: g.ramakrishna@exgate.tek.com wrote: >>>>I would like to ask, if there is some project >>>>for porting X windows system to Embedded >>>>PPC Linux. I use board with MPC823E with >>>>VGA TFT display+touch screen, 32MB RWM, >>>>4MB FLASH, Ethernet, serial RS232,.... >>>>I would like to use it as remote graphic terminal >>>>communicating via Ethernet by means of X protocol. >>>>Does somebody know how to make it work ? >>>> >>>> >>>> >>>> >>>There is nothing much to port. Few months back I had cross-compiled TinyX >>>successfully for a MPC860 board on x86 platform. >>>Except the proprietary touch screen interface(we added this ourself), >>>everything else worked fine on the target framebuffer device. But I >>> >>> Could you send me please appropriate link to TinyX source tree you successfully used for building working X ? Thank you, HANYS ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/