From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3EA8035E.3040705@mail.utexas.edu> Date: Thu, 24 Apr 2003 10:31:42 -0500 From: Chris Heintzelman MIME-Version: 1.0 To: Dale Farnsworth Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: booting MGT5100? References: <3EA70BDE.9080609@mail.utexas.edu> <20030424020846.GA1283@rover.farnsworth.org> In-Reply-To: <20030424020846.GA1283@rover.farnsworth.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Thanks for the info! I'm also using an icecube board. I'll grab the code from mv when you post it there. Do you use a bootloader or do you just use dbug to run a zImage? -Chris H. >On Wed, Apr 23, 2003 at 09:55:42PM +0000, Chris Heintzelman wrote: > > >>I noticed that a few months ago someone mentioned booting Linux on one >>of these boards (MGT5100). There didn't seem to be much discussion >>though; I have one of these boards and would also like to boot linux on >>it, I'm wondering if anyone can point me to a good starting point on >>this? Any help is appreciated. I've got a toolchain and kernel built >>but am having no luck with it. >> >>Thanks, >>Chris H. >> >> > >I've been working with Kent Borg to bring up linux on the mgt5100. >As Peter said, they're running it on an icecube, while I have a glacier >system. The serial driver seems reasonably solid. I've been working >on an ethernet driver and started testing it today. It has sent and >received a few packets but lots of cleanup remains. I plan to put up a >bk repository on source.mvista.com in a couple of weeks. I could send >you a tarball if you'd rather not wait. > >-Dale Farnsworth > > > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/