From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3ECA5AF4.2090302@mvista.com> Date: Tue, 20 May 2003 11:42:28 -0500 From: Mark Hatle MIME-Version: 1.0 To: XOL Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: perl under eldk for ppc8xx References: In-Reply-To: Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: If you can complete the configure step on the MPC862, then you should be able to cross compile the rest. You may have to play some games w/ swap to complete the configure. (For instance, enable swap over NFS or on a compact flash device.. just be aware swap is a quick way to burn out a CF card..) --Mark XOL wrote: > Hi. > I just made my first attempt to build perl 5_005_03. > I'm runnig linux 2.4.18 on MPC862 at 100MHz with 64M ram. > My filesystem is nfs mounted. > While running ./Configure I got nice core dump > saying something about lack of the memory. > So my next quiestion is > 1. Does anyone has binaries or rpm? > 2. Did someone build perl before on same system? > > -----Original Message----- > From: Mark Hatle > To: XOL > Date: Tue, 20 May 2003 11:13:00 -0500 > Subject: Re: perl under eldk for ppc8xx > > >> >>If you are going to be building perl, you really need to do it "self-hosted", >>unless you are prepared to do significant modification to the perl build system. >> Perl insists on being self-hosted compiled, it generates dynamic signal lists >>and other structures based on the machine performing the compile, obviously that >>doesn't work right in a cross compile situation. >> >>--Mark >> >>XOL wrote: >> >>>Hello. >>>I found out that eldk 2.1.0 whic I'm using has no perl. >>>Does anybody succeded to build perl for ppc8xx? >>>Can you give please some details. Probably you have binaries/rpm >>>Thank you. Xol. >>> >>> >>> >>> >>> >> >> >> >> > > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/