From: emanuel stiebler <emu@ecubics.com>
To: linux-emb <linuxppc-embedded@lists.linuxppc.org>
Subject: ELDK, linuxppc_devel, IDE drives on HPT372
Date: Tue, 03 Jun 2003 11:25:03 -0600 [thread overview]
Message-ID: <3EDCD9EF.6080703@ecubics.com> (raw)
Hi all,
Anybody out here got the ide drives working on a hpt372 controller ?
(ELDK, linuxppc_devel from CVS, 8245 CPU)
On my board, the controller get correctly detected, but fails to find
any drive:
----------------------------------------------------------------------
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
HPT372: IDE controller on PCI bus 00 dev 50
HPT372: chipset revision 5
HPT372: not 100% native mode: will probe irqs later
HPT366/368/370/370A/372
HPT370: using 33MHz PCI clock
ide0: BM-DMA at 0xfebffe00-0xfebffe07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xfebffe08-0xfebffe0f, BIOS settings: hdc:pio, hdd:pio
probing for hda: present=0, media=32, probetype=ATA
----------------------------------------------------------------------
went to all four hda, hdb, hdc, hdd and boots then from NFS.
Any ideas ?
cheer,
emanuel
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
reply other threads:[~2003-06-03 17:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3EDCD9EF.6080703@ecubics.com \
--to=emu@ecubics.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).