* Re: jffs2 partition on a TQM860L???
[not found] <20030604095429.EFD9AC5492@atlas.denx.de>
@ 2003-06-04 10:15 ` Steven Scholz
0 siblings, 0 replies; 3+ messages in thread
From: Steven Scholz @ 2003-06-04 10:15 UTC (permalink / raw)
To: Linuxppc-Embedded
Wolfgang Denk schrieb:
> In message <3EDDB269.1080609@imc-berlin.de> you wrote:
>
>>I do use your linuxppc_2_4_devel tree. But still I don't know how to
>>configure one big JFFS2 partition that spawns over two flash banks!
>
>
> Just type "make TQM860L_config ; make oldconfig".
>
>
>>Or maybe I don't understand the difference betwenn the two sturcts:
>>
>>/* partition definition for first flash bank
>> * also ref. to "drivers\char\flash_config.c"
>> */
>>static struct mtd_partition tqm8xxl_partitions[] = {
>>...
>>
>>/* partition definition for second flahs bank */
>>static struct mtd_partition tqm8xxl_fs_partitions[] = {
>
>
> You must be confusing source versions. In the linuxppc_2_4_devel tree
> there is just one declaration for tqm8xxl_partitions[].
>
> tqm8xxl_fs_partitions[] was only used in older versions of our tree.
>
> Best regards,
>
> Wolfgang Denk
>
Oh! I see. Apparently while updating to a newer MTD version this file
was overwritten with an older version!
Thanks again!
Steven
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* jffs2 partition on a TQM860L???
@ 2003-06-02 16:55 Steven Scholz
2003-06-02 19:56 ` Wolfgang Denk
0 siblings, 1 reply; 3+ messages in thread
From: Steven Scholz @ 2003-06-02 16:55 UTC (permalink / raw)
To: Linuxppc-Embedded
Hi there,
I want to use JFFS2 as root fs on a TQM860L with 8MB flash.
This flash is seperated into two flash banks each 4MB.
(How) can I define one big jffs2 partition (in
./drivers/mtd/maps/tqm8xxl.c) that contains sectors from both flash banks?
Thanks a million,
Steven
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: jffs2 partition on a TQM860L???
2003-06-02 16:55 Steven Scholz
@ 2003-06-02 19:56 ` Wolfgang Denk
0 siblings, 0 replies; 3+ messages in thread
From: Wolfgang Denk @ 2003-06-02 19:56 UTC (permalink / raw)
To: Steven Scholz; +Cc: Linuxppc-Embedded
In message <3EDB8199.8090805@imc-berlin.de> you wrote:
>
> I want to use JFFS2 as root fs on a TQM860L with 8MB flash.
> This flash is seperated into two flash banks each 4MB.
>
> (How) can I define one big jffs2 partition (in
> ./drivers/mtd/maps/tqm8xxl.c) that contains sectors from both flash banks?
Just use a more recent version of the MTD code, for example as
contained in our linuxppc_2_4_devel tree. It will automagically join
adjacent flash banks into one MTD device.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
"An open mind has but one disadvantage: it collects dirt."
- a saying at RPI
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-06-04 10:15 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20030604095429.EFD9AC5492@atlas.denx.de>
2003-06-04 10:15 ` jffs2 partition on a TQM860L??? Steven Scholz
2003-06-02 16:55 Steven Scholz
2003-06-02 19:56 ` Wolfgang Denk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).