From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3F573AC1.1010807@gdatech.co.in> Date: Thu, 04 Sep 2003 18:44:41 +0530 From: "s.lavanya" MIME-Version: 1.0 To: linuxppc-dev@lists.linuxppc.org Subject: MPC 8245 JTAG related doubts Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Hi, With reference to the BSDL file MPC8345BSDL2.txt there are some clerifications needed. (i) In the BSDL file the boundary length specified is BOUNDARY_LENGTH of MPC8245: entity is 507 but while testing, it seems to be there are only 506 cells in the JTAG chain between the TDI and TDO lines. (ii) In the BSDL file(Page 12) there is a function control = control cell with resetb reset to "input". Kindly give the explaination. (iii) Similary in the same page it is writen safe = value in control cell to make input normally = 0 for bidir and control. Kindly give the explaination (iv) dsval = diabling(input) value what do you mean by this? Kindly send me mail as soon as possible to s.lavanya@gdatech.co.in We want to program the flash memory through the 8 bit JTAG interface. Update DR does not affect the expected pins. For example WE_L pin I am setting as 0. But it remains in 1. Always WE_L remains in high.Similar is the case with the datapins. We use MDH0 to MDH7 as our SDRAM data lines. (I have doubts in the number shifts whether it is 506 or 507 including the exit DR shift) Will you please help me out by giving the sample JTAG code which we can modify and use. Please give the details about the direction control of bidir signals and resetb. Kindly reply me as soon as possible to s.lavanya@gdatech.co.in ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/