MPC8266ADS patch

MPC8266ADS patch

[Curtis, Allen]

Here is a patch to make MPC8266ADS its own platform. Instead of creating a
new platforms/ads8266.h header, I could have inserted conditional compiles
into the ads8260.h for the memory map differences.

Note: This is enough to get the kernel to build, boot and run. There are
other issues that still need to be addressed.

Thanks


# This is a BitKeeper generated patch for the following project:
# Project Name: Linux 2.4 for PowerPC development tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
#	           ChangeSet	1.1380  -> 1.1381
#	arch/ppc/platforms/Makefile	1.45    -> 1.46
#	  arch/ppc/config.in	1.206   -> 1.207
#	arch/ppc/boot/simple/embed_config.c	1.33    -> 1.34
#	arch/ppc/boot/simple/m8260_tty.c	1.3     -> 1.4
#	include/asm-ppc/mpc8260.h	1.17    -> 1.18
#	               (new)	        -> 1.1
arch/ppc/platforms/ads8266.h
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 03/09/09	curtisa@irvsoftws21.devdom.local
<mailto:curtisa@irvsoftws21.devdom.local> 	1.1381
# Fixed MPC8266ADS platform configuration and build
# --------------------------------------------
#
diff -Nru a/arch/ppc/boot/simple/embed_config.c
b/arch/ppc/boot/simple/embed_config.c
--- a/arch/ppc/boot/simple/embed_config.c	Tue Sep  9 16:43:58 2003
+++ b/arch/ppc/boot/simple/embed_config.c	Tue Sep  9 16:43:58 2003
@@ -616,7 +616,7 @@
  }
#endif /* RPX6 for testing */
*	#ifdef CONFIG_ADS8260
		+#if defined(CONFIG_ADS8260) || defined(CONFIG_ADS8266)
		void
		embed_config(bd_t **bdp)
	{
	diff -Nru a/arch/ppc/boot/simple/m8260_tty.c
b/arch/ppc/boot/simple/m8260_tty.c
	--- a/arch/ppc/boot/simple/m8260_tty.c	Tue Sep  9 16:43:58 2003
	+++ b/arch/ppc/boot/simple/m8260_tty.c	Tue Sep  9 16:43:58 2003
	@@ -46,7 +46,7 @@
		*/
		while (cp->cp_cpcr & CPM_CR_FLG);
*	#ifdef CONFIG_ADS8260
	+#if defined(CONFIG_ADS8260) || defined(CONFIG_ADS8266)
		/* Enable the RS-232 transceivers.
		*/
		*(volatile uint *)(BCSR_ADDR + 4) &=
	diff -Nru a/arch/ppc/config.in b/arch/ppc/config.in
	--- a/arch/ppc/config.in	Tue Sep  9 16:43:58 2003
	+++ b/arch/ppc/config.in	Tue Sep  9 16:43:58 2003
	@@ -61,6 +61,7 @@
		define_bool CONFIG_SERIAL_CONSOLE y
	   choice 'Machine Type'	\
		"ADS8260	CONFIG_ADS8260	\
*	ADS8266	CONFIG_ADS8266	\
  	EST8260	CONFIG_EST8260	\
  	SBS8260	CONFIG_SBS8260	\
  	RPXSUPER	CONFIG_RPX6	\
diff -Nru a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
--- a/arch/ppc/platforms/Makefile	Tue Sep  9 16:43:58 2003
+++ b/arch/ppc/platforms/Makefile	Tue Sep  9 16:43:58 2003
@@ -64,7 +64,7 @@
ifeq ($(CONFIG_8260),y)
obj-$(CONFIG_PCI)		+= mpc8260_pci9.o
endif
*	ifeq ($(CONFIG_ADS8260),y)
+ifeq ($(CONFIG_ADS8266),y)
obj-$(CONFIG_PCI)		+= mpc8266ads_pci.o
endif
obj-$(CONFIG_ALL_PPC)		+= pmac_pic.o pmac_setup.o pmac_time.o \
diff -Nru a/arch/ppc/platforms/ads8266.h b/arch/ppc/platforms/ads8266.h
--- /dev/null	Wed Dec 31 16:00:00 1969
+++ b/arch/ppc/platforms/ads8266.h	Tue Sep  9 16:43:58 2003
@@ -0,0 +1,87 @@
+
+/*
+ * A collection of structures, addresses, and values associated with + *
the Motorola MPC8266ADS-PCI board.
+ * Copied from the RPX-Classic and SBS8260 stuff.
+ *
+ * Copyright © 2001 Dan Malek (dan@mvista.com <mailto:dan@mvista.com> )
+ */
+#ifdef __KERNEL__
+#ifndef __MACH_ADS8266_DEFS
+#define __MACH_ADS8266_DEFS
+
+#include <linux/config.h>
+
+#include <asm/ppcboot.h>
+
+/* Memory map is configured by the PROM startup.
+ * We just map a few things we need.  The CSR is actually 4 byte-wide + *
registers that can be accessed as 8-, 16-, or 32-bit values.
+ */
+#define IMAP_ADDR		((uint)0xf0000000)
+#define BCSR_ADDR		((uint)0x04500000)
+#define BCSR_SIZE		((uint)(32 * 1024))
+
+/* The ADS8260 has 16, 32-bit wide control/status registers, accessed + *
only on word boundaries.
+ * Not all are used (yet), or are interesting to us (yet).
+ */
+
+/* Things of interest in the CSR.
+*/
+#define BCSR1_FETHIEN		((uint)0x08000000)	/* 0 == enable */
+#define BCSR1_FETH_RST		((uint)0x04000000)	/* 0 == reset */
+#define BCSR1_RS232_EN1		((uint)0x02000000)	/* 0 ==
enable */
+#define BCSR1_RS232_EN2		((uint)0x01000000)	/* 0 ==
enable */
+
+#define PHY_INTERRUPT	SIU_INT_IRQ7
+
+#ifdef CONFIG_PCI
+/* PCI interrupt controller */
+#define PCI_INT_STAT_REG	0x04730000
+#define PCI_INT_MASK_REG	0x04730004
+#define PIRQA			(NR_SIU_INTS + 0)
+#define PIRQB			(NR_SIU_INTS + 1)
+#define PIRQC			(NR_SIU_INTS + 2)
+#define PIRQD			(NR_SIU_INTS + 3)
+
+/*
+ * PCI memory map definitions for MPC8266ADS-PCI.
+ *
+ * processor view
+ *	local address		PCI address		target
+ *	0x80000000-0x9FFFFFFF	0x80000000-0x9FFFFFFF	PCI mem with
prefetch
+ *	0xA0000000-0xBFFFFFFF	0xA0000000-0xBFFFFFFF	PCI mem w/o prefetch
+ *	0xF4000000-0xF7FFFFFF	0x00000000-0x03FFFFFF	PCI IO
+ *
+ * PCI master view
+ *	local address		PCI address		target
+ *	0x00000000-0x1FFFFFFF	0x00000000-0x1FFFFFFF	MPC8266 local memory
+ */
+
+/* window for a PCI master to access MPC8266 memory */
+#define PCI_SLV_MEM_LOCAL	0x00000000	/* Local base */
+#define PCI_SLV_MEM_BUS		0x00000000	/* PCI base */
+
+/* window for the processor to access PCI memory with prefetching */
+#define PCI_MSTR_MEM_LOCAL	0x80000000	/* Local base */
+#define PCI_MSTR_MEM_BUS	0x80000000	/* PCI base   */
+#define PCI_MSTR_MEM_SIZE	0x20000000	/* 512MB */
+
+/* window for the processor to access PCI memory without prefetching */
+#define PCI_MSTR_MEMIO_LOCAL	0xA0000000	/* Local base */
+#define PCI_MSTR_MEMIO_BUS	0xA0000000	/* PCI base   */
+#define PCI_MSTR_MEMIO_SIZE	0x20000000	/* 512MB */
+
+/* window for the processor to access PCI I/O */
+#define PCI_MSTR_IO_LOCAL	0xF4000000	/* Local base */
+#define PCI_MSTR_IO_BUS         0x00000000	/* PCI base   */
+#define PCI_MSTR_IO_SIZE        0x04000000	/* 64MB */
+
+#define _IO_BASE		PCI_MSTR_IO_LOCAL
+#define _ISA_MEM_BASE		PCI_MSTR_MEMIO_LOCAL
+#define PCI_DRAM_OFFSET		PCI_SLV_MEM_BUS
+#endif /* CONFIG_PCI */
+
+#endif /* __MACH_ADS8266_DEFS */
+#endif /* __KERNEL__ */
diff -Nru a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h
--- a/include/asm-ppc/mpc8260.h	Tue Sep  9 16:43:58 2003
+++ b/include/asm-ppc/mpc8260.h	Tue Sep  9 16:43:58 2003
@@ -28,6 +28,10 @@
#include <platforms/ads8260.h>
#endif

+#ifdef CONFIG_ADS8266
+#include <platforms/ads8266.h>
+#endif
+
#ifdef CONFIG_WILLOW
#include <platforms/willow.h>
#endif


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: MPC8266ADS patch

[Dan Malek]

Curtis, Allen (by way of Allen Curtis ) wrote:

 > Here is a patch to make MPC8266ADS its own platform. Instead of creating a
 > new platforms/ads8266.h header, ....

Will the "other issues to be addressed" cause the need for more definitions
or further #ifdefs in the existing file?  If so, let's just go ahead and
create the new file now and just add to it later.

Thanks.


	-- Dan


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: MPC8266ADS patch

[Rakesh Jagota]

hi,

i am trying to integrate IR keyboard to a custom board.
I am having serial console on the boad.

when i am calling handle_scancode in keyboard.c
this statement,

 void handle_scancode(unsigned char scancode, int down)
 {
 -----
 tty = ttytab? ttytab[fg_console]: NULL;
 ;
 }

returns tty=NULL

          __init kbd_init(void)
 {
  ------
  ------
  ttytab = console_driver.table;
 }

in this fuction also ttytab[fg_console] is still NULL

Is serial console is enough to keyboard?

i have frambuffer support on my board. (without HW
      graphic accelerator)

How to enable the frambufffer console on my board.
      (i am attaching the config file below)

===========#
#
CONFIG_PC_KEYBOARD=y
#
# Console drivers
#

#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_OF is not set
# CONFIG_FB_CONTROL is not set
# CONFIG_FB_PLATINUM is not set
# CONFIG_FB_VALKYRIE is not set
# CONFIG_FB_CT65550 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_S3TRIO is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_MQ200 is not set
# CONFIG_FB_IT8181 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_ADVANCED=y
# CONFIG_FBCON_MFB is not set
# CONFIG_FBCON_CFB2 is not set
# CONFIG_FBCON_CFB4 is not set
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
# CONFIG_FBCON_CFB24 is not set
# CONFIG_FBCON_CFB32 is not set
# CONFIG_FBCON_AFB is not set
# CONFIG_FBCON_ILBM is not set
# CONFIG_FBCON_IPLAN2P2 is not set
# CONFIG_FBCON_IPLAN2P4 is not set
# CONFIG_FBCON_IPLAN2P8 is not set
# CONFIG_FBCON_MAC is not set
# CONFIG_FBCON_VGA_PLANES is not set
# CONFIG_FBCON_VGA is not set
# CONFIG_FBCON_HGA is not set
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
CONFIG_FBCON_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
CONFIG_FONT_ACORN_8x8=y

#
# Input core support
#
CONFIG_INPUT=y
CONFIG_INPUT_KEYBDEV=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set

#
# Macintosh device drivers
#

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256

##
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
# CONFIG_RWMOUSE is not set



========================================================



Ur suggestions are appreciated
Thanks in advance
Rakesh Jagota


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

PPC 405

[Rakesh Jagota]

hi,

i am trying to integrate IR keyboard to a custom board.
I am having serial console on the boad.

when i am calling handle_scancode in keyboard.c
this statement,

 void handle_scancode(unsigned char scancode, int down)
 {
 -----
 tty = ttytab? ttytab[fg_console]: NULL;
 ;
 }

returns tty=NULL

          __init kbd_init(void)
 {
  ------
  ------
  ttytab = console_driver.table;
 }

in this fuction also ttytab[fg_console] is still NULL

Is serial console is enough to keyboard?

i have frambuffer support on my board. (without HW
      graphic accelerator)

How to enable the frambufffer console on my board.
      (i am attaching the config file below)

===========#
#
CONFIG_PC_KEYBOARD=y
#
# Console drivers
#

#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_OF is not set
# CONFIG_FB_CONTROL is not set
# CONFIG_FB_PLATINUM is not set
# CONFIG_FB_VALKYRIE is not set
# CONFIG_FB_CT65550 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_S3TRIO is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_MQ200 is not set
# CONFIG_FB_IT8181 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_ADVANCED=y
# CONFIG_FBCON_MFB is not set
# CONFIG_FBCON_CFB2 is not set
# CONFIG_FBCON_CFB4 is not set
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
# CONFIG_FBCON_CFB24 is not set
# CONFIG_FBCON_CFB32 is not set
# CONFIG_FBCON_AFB is not set
# CONFIG_FBCON_ILBM is not set
# CONFIG_FBCON_IPLAN2P2 is not set
# CONFIG_FBCON_IPLAN2P4 is not set
# CONFIG_FBCON_IPLAN2P8 is not set
# CONFIG_FBCON_MAC is not set
# CONFIG_FBCON_VGA_PLANES is not set
# CONFIG_FBCON_VGA is not set
# CONFIG_FBCON_HGA is not set
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
CONFIG_FBCON_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
CONFIG_FONT_ACORN_8x8=y

#
# Input core support
#
CONFIG_INPUT=y
CONFIG_INPUT_KEYBDEV=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set

#
# Macintosh device drivers
#

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256

##
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
# CONFIG_RWMOUSE is not set

========================================================

Ur suggestions are appreciated
Thanks in advance
Rakesh Jagota

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: PPC 405

[Andrew H Pham]

Rakesh,

What kernel are you using?

Andrew Pham

[ Rakesh Jagota <j.rakesh@gdatech.co.in> writes: ]
>
> i am trying to integrate IR keyboard to a custom board.
> I am having serial console on the boad.
>
> when i am calling handle_scancode in keyboard.c
> this statement,
>
>  void handle_scancode(unsigned char scancode, int down)
>  {
>  -----
>  tty = ttytab? ttytab[fg_console]: NULL;
>  ;
>  }
>
> returns tty=NULL
>
>           __init kbd_init(void)
>  {
>   ------
>   ------
>   ttytab = console_driver.table;
>  }
>
> in this fuction also ttytab[fg_console] is still NULL
>
> Is serial console is enough to keyboard?
>
> i have frambuffer support on my board. (without HW
>       graphic accelerator)
>
> How to enable the frambufffer console on my board.
>       (i am attaching the config file below)
[ omitted ]

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: PPC 405

[Rakesh Jagota]

hi all,
We are using linux from montvista (linux-2.4.17_mvl21). We are
working on custom design board based on vulcan chip -stbx25xx
(IBM405 ppc). The board name is redwood6.

I am getting the following values

in fuction:  handle_scancode()
fg_console=0
ttytab[fg_console]=NULL;

what change i have  to do to get the keys on my serial console.
Thanks in advance
Rakesh

Andrew H Pham wrote:

> Rakesh,
>
> What kernel are you using?
>
> Andrew Pham
>
> [ Rakesh Jagota <j.rakesh@gdatech.co.in> writes: ]
> >
> > i am trying to integrate IR keyboard to a custom board.
> > I am having serial console on the boad.
> >
> > when i am calling handle_scancode in keyboard.c
> > this statement,
> >
> >  void handle_scancode(unsigned char scancode, int down)
> >  {
> >  -----
> >  tty = ttytab? ttytab[fg_console]: NULL;
> >  ;
> >  }
> >
> > returns tty=NULL
> >
> >           __init kbd_init(void)
> >  {
> >   ------
> >   ------
> >   ttytab = console_driver.table;
> >  }
> >
> > in this fuction also ttytab[fg_console] is still NULL
> >
> > Is serial console is enough to keyboard?
> >
> > i have frambuffer support on my board. (without HW
> >       graphic accelerator)
> >
> > How to enable the frambufffer console on my board.
> >       (i am attaching the config file below)
> [ omitted ]
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: MPC8266ADS patch

[Tom Rini]

On Wed, Sep 10, 2003 at 11:44:32PM -0400, Dan Malek wrote:
>
> Curtis, Allen (by way of Allen Curtis ) wrote:
>
> > Here is a patch to make MPC8266ADS its own platform. Instead of creating a
> > new platforms/ads8266.h header, ....
>
> Will the "other issues to be addressed" cause the need for more definitions
> or further #ifdefs in the existing file?  If so, let's just go ahead and
> create the new file now and just add to it later.

And, better yet, why not just pull all of the ADS8266 bits in _devel now
out to 2.4 proper?  (And, pretty please, for 2.6 as well? :))

--
Tom Rini
http://gate.crashing.org/~trini/

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

RE: MPC8266ADS patch

[Curtis, Allen]

> > Here is a patch to make MPC8266ADS its own platform. Instead of creating
a
> > new platforms/ads8266.h header, ....
>
> Will the "other issues to be addressed" cause the need for more
definitions
> or further #ifdefs in the existing file?  If so, let's just go ahead and
> create the new file now and just add to it later.

And, better yet, why not just pull all of the ADS8266 bits in _devel now
out to 2.4 proper?  (And, pretty please, for 2.6 as well? :))

I'll do that if someone will review and commit the changes.


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: MPC8266ADS patch

[Tom Rini]

On Fri, Sep 12, 2003 at 08:59:51AM -0700, Curtis, Allen wrote:
> > > Here is a patch to make MPC8266ADS its own platform. Instead of creating
> a
> > > new platforms/ads8266.h header, ....
> >
> > Will the "other issues to be addressed" cause the need for more
> definitions
> > or further #ifdefs in the existing file?  If so, let's just go ahead and
> > create the new file now and just add to it later.
>
> And, better yet, why not just pull all of the ADS8266 bits in _devel now
> out to 2.4 proper?  (And, pretty please, for 2.6 as well? :))
>
> I'll do that if someone will review and commit the changes.

It's a deal.

--
Tom Rini
http://gate.crashing.org/~trini/

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/