From: Peter Ryser <Peter.Ryser@xilinx.com>
To: hyding <nari_dhy@nari-china.com>
Cc: linuxppc-embed <linuxppc-embedded@lists.linuxppc.org>
Subject: Re: mount root on the ml300 board
Date: Wed, 29 Oct 2003 06:56:34 -0800 [thread overview]
Message-ID: <3F9FD522.5050106@xilinx.com> (raw)
In-Reply-To: <000701c39911$53d15f70$4844900a@hydingnb1>
Make sure to enable device file system (/devfs) support during kernel
configuration.
- Peter
hyding wrote:
>hi,
> I am debugging MontaVista linux pro3.0(kernel 2.4.28) on the ml300
>board. I use IBM MicroDrive 1GB card to configure the FPGA and act as
>root fs. But the boot stops and displays the following:
>...
>block: 128 slots per queue, batch=32
>Partition check:
> xsysacea: xsysacea1 xsysacea2 xsysacea3
>System ACE at 0xCF000000 mapped to 0xC900F000, irq=9, 1052352KB
>Kernel panic: I have no root and I want to scream
> <0>Rebooting in 180 seconds..
> There are 3 partitions in the CF card. The 1st is the fat12. The 2st
>is swap and the 3rd is the root. Kernel command line: console=ttyS0,9600
>root=/dev/sysace3 rw
> Did someone have the problem? Any hints will be appreciable.
>
>Thanks!
>
>
>
>
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
prev parent reply other threads:[~2003-10-29 14:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-23 2:56 mount root on the ml300 board hyding
2003-10-29 14:56 ` Peter Ryser [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F9FD522.5050106@xilinx.com \
--to=peter.ryser@xilinx.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
--cc=nari_dhy@nari-china.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).