linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
* mount root on the ml300 board
@ 2003-10-23  2:56 hyding
  2003-10-29 14:56 ` Peter Ryser
  0 siblings, 1 reply; 2+ messages in thread
From: hyding @ 2003-10-23  2:56 UTC (permalink / raw)
  To: linuxppc-embed


hi,
    I am debugging MontaVista linux pro3.0(kernel 2.4.28) on the ml300
board. I use IBM MicroDrive 1GB card to configure the FPGA and act as
root fs. But the boot stops and displays the following:
...
block: 128 slots per queue, batch=32
Partition check:
 xsysacea: xsysacea1 xsysacea2 xsysacea3
System ACE at 0xCF000000 mapped to 0xC900F000, irq=9, 1052352KB
Kernel panic: I have no root and I want to scream
 <0>Rebooting in 180 seconds..
    There are 3 partitions in the CF card. The 1st is the fat12. The 2st
is swap and the 3rd is the root. Kernel command line: console=ttyS0,9600
root=/dev/sysace3 rw
    Did someone have the problem? Any hints will be appreciable.

Thanks!

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2003-10-29 14:56 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-10-23  2:56 mount root on the ml300 board hyding
2003-10-29 14:56 ` Peter Ryser

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).