From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3FA50B32.4010400@iti.fi> Date: Sun, 02 Nov 2003 15:48:34 +0200 From: Kate Alhola MIME-Version: 1.0 To: linuxppc-embedded@lists.linuxppc.org Subject: Re: linuxppc_2_4_mpc5200 / 5200lite zImage References: <3FA4F3B2.6050106@iti.fi> In-Reply-To: <3FA4F3B2.6050106@iti.fi> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Kate Alhola wrote: > > I just got Motorola5200 lite board and tried complie > linuxppc_2_4_mpc5200 from > denx to it. When i say make bzImage it complains that __res is undefined > > __res is pointer to external scc buffer descriptors . Least it looks a > like that it is > defined in arch/ppc/platforms/icecube.c but this code looks a like > complete > board initialization code so i am not sure is it right module to add > defining __res It looks a like that i have too much fixation from mpc8xx(x) programming in this case bd didnt stand for bufferr descriptor but board u-boot board descriptor and in this case the mgt5100_tty.c look a like have one dependence to ppcboot, it took the ibp bus clock frequency from ppcboot bd struct even not ppc-boot configuration. I replaced it with just plain #define . Now just i should do testing ... Kate -- +==================================================================+ ! Kate Marika Alhola Internet Technologies International Oy ! ! kate@iti.fi Phone +358 400 740701 Fax +358 9 8138715 ! ! kate@iki.fi http://www.iti.fi http://www.iki.fi/kate ! +==================================================================+ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/