From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <3FA5235B.7080007@iti.fi> Date: Sun, 02 Nov 2003 17:31:39 +0200 From: Kate Alhola MIME-Version: 1.0 To: linuxppc-embedded@lists.linuxppc.org Subject: Re: linuxppc_2_4_mpc5200 / 5200lite zImage continued References: <3FA4F3B2.6050106@iti.fi> <3FA50B32.4010400@iti.fi> In-Reply-To: <3FA50B32.4010400@iti.fi> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Kate Alhola wrote: > > > and in this case the mgt5100_tty.c look a like have one dependence > to ppcboot, it took the ibp bus clock frequency from ppcboot bd struct > even > not ppc-boot configuration. I replaced it with just plain #define . > Now just i should do testing ... I just fixed it by comenting out setting baudrate, then it will leave it as it was after dBug. Now i get kernel booting up and initial strings coming out but kernel crashes after initMMU ( early boot prit enabled ), I think that i have something wrong in .config. I did not find goog example gor 5200lite from denx tree so i made my best quess and it seems not to bee so good. Kate -- continues hacking .... dBUG> dn -i zImage.icecube Address: 0x00020000 Downloading Image 'zImage.icecube' from 195.218.81.140 .............. 939645 bytes read via TFTP dBUG> go 20000 loaded at: 00020000 001071B8 relocated to: 00800000 008E71B8 zimage at: 00805830 008E3C88 avail ram: 00400000 00800000 Linux/PPC load: console=ttyS0,9600 root=/dev/sda2 Uncompressing Linux...done. Now booting the kernel id mach(): doneMMU:enterMMU:hw initMMU:mapin ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/