From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3FA55727.8040803@iti.fi> Date: Sun, 02 Nov 2003 21:12:39 +0200 From: Kate Alhola MIME-Version: 1.0 To: Wolfgang Denk Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: linuxppc_2_4_mpc5200 / 5200lite zImage now working References: <20031102155604.35E0AC5F59@atlas.denx.de> In-Reply-To: <20031102155604.35E0AC5F59@atlas.denx.de> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Thank you about usefull help, it looks a like doing things in newer way may be faster than do older way ;) Wolfgang Denk wrote: >No. It's much more likely that you missed to pass someother of the >required information. You have several options: manually set up a >bd_info structure with _all_ of the required information; modifying >U-Boot so that you can load and start U-Boot from RAM; installing >U-Boot into flash. > > This worked with u-boot, setting CFG_RAMBOOT made it bootting from RAM and allowed also programming u-boot to same flash as dbug so now i can start uboot from dbug and then boot linux up >You can always get a tested and working configuration by performing >the standard kernel build procedure: > > bash$ make mrproper > bash$ make icecube_5200_config > bash$ make oldconfig > bash$ make dep > bash$ make uImage > > Tanks, that was also usefull Kate -- +==================================================================+ ! Kate Marika Alhola Internet Technologies International Oy ! ! kate@iti.fi Phone +358 400 740701 Fax +358 9 8138715 ! ! kate@iki.fi http://www.iti.fi http://www.iki.fi/kate ! +==================================================================+ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/