From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3FCF540C.3010302@embeddededge.com> Date: Thu, 04 Dec 2003 10:34:36 -0500 From: Dan Malek MIME-Version: 1.0 To: Pantelis Antoniou Cc: Paul Mackerras , linuxppc-embedded@lists.linuxppc.org Subject: Re: the door is closing for 2.4 References: <16334.33020.624995.521330@cargo.ozlabs.ibm.com> <3FCEFB59.80300@intracom.gr> <3FCF3CE0.4020008@embeddededge.com> <3FCF4D78.9000706@intracom.gr> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Pantelis Antoniou wrote: > Once upon a time I had it at least compile, but for my board only. > But then you mentioned you were working on it and I dropped it. I had been working on it, primarily to get the processor specific changes done. > Could you please elaborate on the tasks that need to be done? > I know that the head_8xx.S file definetely needs alot of work, > and you mentioned the drivers. The serial driver doesn't compile since the serial subsystem was reworked. The old data structures used to represent port information (in particular serial_state) no longer works. Yes, head_8xx.S needs lots of work, but to me that is the easy part :-) > What is the minimum stuff needed to make it work at least for my > boards? Make it compile again, I'll take it from there. > I'd be happy to help at least as long as my busy schedule permits. Me, too. Just don't be annoyed if it takes me a while to respond, especially if testing changes is involved. Thanks. -- Dan ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/