Re: [PowerPC] [PASEMI] Issue with the identification of ATA drives after the of/irq updates 2024-05-29

[Christian Zigotzky <chzigotzky@xenosoft.de>]

On 04.07.24 13:53, Michael Ellerman wrote:
> Christian Zigotzky <chzigotzky@xenosoft.de> writes:
>> On 02.07.24 18:54, Marc Zyngier wrote:
>>> On Sun, 30 Jun 2024 11:21:55 +0100,
>>> Christian Zigotzky <chzigotzky@xenosoft.de> wrote:
>>>> Hello,
>>>>
>>>> There is an issue with the identification of ATA drives with our
>>>> P.A. Semi Nemo boards [1] after the
>>>> commit "of/irq: Factor out parsing of interrupt-map parent
>>>> phandle+args from of_irq_parse_raw()" [2].
> ...
>>> --- a/drivers/of/irq.c
>>> +++ b/drivers/of/irq.c
>>> @@ -282,8 +282,10 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
>>>    
>>>    			oldimap = imap;
>>>    			imap = of_irq_parse_imap_parent(oldimap, imaplen, out_irq);
>>> -			if (!imap)
>>> -				goto fail;
>>> +			if (!imap) {
>>> +				match = 0;
>>> +				break;
>>> +			}
>>>    
>>>    			match &= of_device_is_available(out_irq->np);
>>>    			if (match)
>>>
>>>
>> We tested this patch yesterday and it solves the boot problem.
> Hi Christian,
>
> Instead of that patch, can you try the one below. AFAICS the device tree
> fixups done in early boot mean the interrupt-map is not needed, and also
> has the wrong content, so if we can remove it entirely that might avoid
> the problems in the parsing code.
>
> I don't know if your firmware actually implements those methods, I
> couldn't find anything online to confirm or deny it. Seems the only
> option is to test it.
>
> cheers
>
>
> diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
> index fbb68fc28ed3..28fe082ede57 100644
> --- a/arch/powerpc/kernel/prom_init.c
> +++ b/arch/powerpc/kernel/prom_init.c
> @@ -3138,6 +3138,14 @@ static void __init fixup_device_tree_pasemi(void)
>   
>   	prom_setprop(iob, name, "interrupt-controller", &val, 0);
>   
> +	prom_printf("nemo: deleting interrupt-map properties\n");
> +	rc = call_prom("interpret", 1, 1,
> +		      " s\" /pxp@0,e0000000\" find-device"
> +		      " s\" interrupt-map\" delete-property"
> +		      " s\" interrupt-map-mask\" delete-property"
> +		      " device-end");
> +	prom_printf("nemo: interpret returned %d\n", rc);
> +
>   	pci_name = "/pxp@0,e0000000/pci@11";
>   	node = call_prom("finddevice", 1, 1, ADDR(pci_name));
>   	parent = ADDR(iob);
Hi Michael,

Many thanks for your patch. We will test it as soon as possible.

Christian