Re: [1/3] powerpc/mm: Don't alias user region to other regions below PAGE_OFFSET

[Michael Ellerman <patch-notifications@ellerman.id.au>]

On Fri, 2016-02-09 at 11:47:59 UTC, Paul Mackerras wrote:
> In commit c60ac5693c47 ("powerpc: Update kernel VSID range", 2013-03-13)
> we lost a check on the region number (the top four bits of the effective
> address) for addresses below PAGE_OFFSET.  That commit replaced a check
> that the top 18 bits were all zero with a check that bits 46 - 59 were
> zero (performed for all addresses, not just user addresses).
> 
> This means that userspace can access an address like 0x1000_0xxx_xxxx_xxxx
> and we will insert a valid SLB entry for it.  The VSID used will be the
> same as if the top 4 bits were 0, but the page size will be some random
> value obtained by indexing beyond the end of the mm_ctx_high_slices_psize
> array in the paca.  If that page size is the same as would be used for
> region 0, then userspace just has an alias of the region 0 space.  If the
> page size is different, then no HPTE will be found for the access, and
> the process will get a SIGSEGV (since hash_page_mm() will refuse to create
> a HPTE for the bogus address).
> 
> The access beyond the end of the mm_ctx_high_slices_psize can be at most
> 5.5MB past the array, and so will be in RAM somewhere.  Since the access
> is a load performed in real mode, it won't fault or crash the kernel.
> At most this bug could perhaps leak a little bit of information about
> blocks of 32 bytes of memory located at offsets of i * 512kB past the
> paca->mm_ctx_high_slices_psize array, for 1 <= i <= 11.
> 
> Cc: stable@vger.kernel.org # v3.10+
> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Applied to powerpc fixes, thanks.

https://git.kernel.org/powerpc/c/f077aaf0754bcba0fffdbd925b

cheers