From: Rojhalat Ibrahim <imr@rtschenk.de>
To: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [RFC][PATCH 2/2] powerpc/fsl-pci Make PCIe hotplug work with Freescale
Date: Mon, 18 Mar 2013 10:22:40 +0100 [thread overview]
Message-ID: <40109604.xu0e1YNl88@pcimr> (raw)
In-Reply-To: <677E5CC0-EC8D-4DB5-B9E3-F4E4D39EEF59@kernel.crashing.org>
On Thursday 14 March 2013 15:35:40 Kumar Gala wrote:
> On Mar 14, 2013, at 4:43 AM, Rojhalat Ibrahim wrote:
> > On Wednesday 13 March 2013 14:07:16 Kumar Gala wrote:
> >> diff --git a/arch/powerpc/sysdev/fsl_pci.c
> >> b/arch/powerpc/sysdev/fsl_pci.c
> >> index 41bbcc4..b18c377 100644
> >> --- a/arch/powerpc/sysdev/fsl_pci.c
> >> +++ b/arch/powerpc/sysdev/fsl_pci.c
> >> @@ -74,6 +74,35 @@ static int __init fsl_pcie_check_link(struct
> >> pci_controller *hose) return 0;
> >> }
> >>
> >> +static int fsl_indirect_read_config(struct pci_bus *bus, unsigned int
> >> devfn, + int offset, int len, u32 *val)
> >> +{
> >> + struct pci_controller *hose = pci_bus_to_host(bus);
> >> +
> >> + /* check the link status */
> >> + if ((bus->number == hose->first_busno) && (devfn == 0)) {
> >> + if (fsl_pcie_check_link(hose))
> >> + hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
> >> + else
> >> + hose->indirect_type &= ~PPC_INDIRECT_TYPE_NO_PCIE_LINK;
> >> + }
> >> + return indirect_read_config(bus, devfn, offset, len, val);
> >> +}
> >> +
> >
> > This does not work because fsl_indirect_read_config calls
> > fsl_pcie_check_link which calls early_read_config_dword which eventually
> > calls fsl_indirect_read_config, so the kernel hangs in a recursion loop.
> > Below is a modified patch that does work.
> ok, that makes sense, but I guess now its making me question the following statement:
> > if ((bus->number == hose->first_busno) && (devfn == 0)) {
>
> Why do we have this conditional?
>
> - k
Right. This is not necessary anymore. I modified the patch accordingly.
Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
---
arch/powerpc/include/asm/pci-bridge.h | 6 ++++
arch/powerpc/sysdev/fsl_pci.c | 51 +++++++++++++++++++++++++++++-----
arch/powerpc/sysdev/indirect_pci.c | 10 ++----
3 files changed, 54 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index c0278f0..ffbc5fd 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -120,6 +120,12 @@ extern void setup_indirect_pci(struct pci_controller* hose,
resource_size_t cfg_addr,
resource_size_t cfg_data, u32 flags);
+extern int indirect_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val);
+
+extern int indirect_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val);
+
static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
{
return bus->sysdata;
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 41bbcc4..9c0fcc9 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -54,12 +54,22 @@ static void quirk_fsl_pcie_header(struct pci_dev *dev)
return;
}
-static int __init fsl_pcie_check_link(struct pci_controller *hose)
+static int fsl_indirect_read_config(struct pci_bus *, unsigned int,
+ int, int, u32 *);
+
+static int fsl_pcie_check_link(struct pci_controller *hose)
{
- u32 val;
+ u32 val = 0;
if (hose->indirect_type & PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK) {
- early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
+ if (hose->ops->read == fsl_indirect_read_config) {
+ struct pci_bus bus;
+ bus.number = 0;
+ bus.sysdata = hose;
+ bus.ops = hose->ops;
+ indirect_read_config(&bus, 0, PCIE_LTSSM, 4, &val);
+ } else
+ early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
if (val < PCIE_LTSSM_L0)
return 1;
} else {
@@ -74,6 +84,33 @@ static int __init fsl_pcie_check_link(struct pci_controller *hose)
return 0;
}
+static int fsl_indirect_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+
+ if (fsl_pcie_check_link(hose))
+ hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
+ else
+ hose->indirect_type &= ~PPC_INDIRECT_TYPE_NO_PCIE_LINK;
+
+ return indirect_read_config(bus, devfn, offset, len, val);
+}
+
+static struct pci_ops fsl_indirect_pci_ops =
+{
+ .read = fsl_indirect_read_config,
+ .write = indirect_write_config,
+};
+
+static void __init fsl_setup_indirect_pci(struct pci_controller* hose,
+ resource_size_t cfg_addr,
+ resource_size_t cfg_data, u32 flags)
+{
+ setup_indirect_pci(hose, cfg_addr, cfg_data, flags);
+ hose->ops = &fsl_indirect_pci_ops;
+}
+
#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
#define MAX_PHYS_ADDR_BITS 40
@@ -469,8 +506,8 @@ int __init fsl_add_bridge(struct platform_device *pdev, int is_primary)
if (!hose->private_data)
goto no_bridge;
- setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
- PPC_INDIRECT_TYPE_BIG_ENDIAN);
+ fsl_setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
+ PPC_INDIRECT_TYPE_BIG_ENDIAN);
if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0)
hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK;
@@ -779,8 +816,8 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
if (ret)
goto err0;
} else {
- setup_indirect_pci(hose, rsrc_cfg.start,
- rsrc_cfg.start + 4, 0);
+ fsl_setup_indirect_pci(hose, rsrc_cfg.start,
+ rsrc_cfg.start + 4, 0);
}
printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index 82fdad8..c6c8b52 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -20,9 +20,8 @@
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
-static int
-indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
- int len, u32 *val)
+int indirect_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
{
struct pci_controller *hose = pci_bus_to_host(bus);
volatile void __iomem *cfg_data;
@@ -78,9 +77,8 @@ indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
return PCIBIOS_SUCCESSFUL;
}
-static int
-indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
- int len, u32 val)
+int indirect_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
{
struct pci_controller *hose = pci_bus_to_host(bus);
volatile void __iomem *cfg_data;
next prev parent reply other threads:[~2013-03-18 9:22 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-13 19:07 [RFC][PATCH 1/2] powerpc/fsl-pci: Keep PCI SoC controller registers in Kumar Gala
2013-03-13 19:07 ` [RFC][PATCH 2/2] powerpc/fsl-pci Make PCIe hotplug work with Freescale Kumar Gala
2013-03-14 9:43 ` Rojhalat Ibrahim
2013-03-14 20:35 ` Kumar Gala
2013-03-18 9:22 ` Rojhalat Ibrahim [this message]
2013-04-03 7:09 ` Rojhalat Ibrahim
2013-04-05 17:37 ` Kumar Gala
2013-04-08 8:15 ` Rojhalat Ibrahim
2013-04-10 15:18 ` Kumar Gala
2013-04-08 8:20 ` [RFC][PATCH 1/2] powerpc/fsl-pci: Keep PCI SoC controller registers in Rojhalat Ibrahim
2013-04-10 15:17 ` Kumar Gala
2013-04-15 5:42 ` [PATCH] powerpc: fix usage of setup_pci_atmu() Michael Neuling
2013-04-15 16:30 ` Kim Phillips
2013-04-29 23:06 ` Stephen Rothwell
2013-04-30 1:08 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40109604.xu0e1YNl88@pcimr \
--to=imr@rtschenk.de \
--cc=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).