From: Mike Wellington <wellington@lucent.com>
To: Jon Masters <jonathan@jonmasters.org>
Cc: linuxppc-embedded@lists.linuxppc.org, wellington@lucent.com,
mike@lo-ex.com
Subject: Re: ml300 boot loader question
Date: Sat, 14 Feb 2004 15:43:07 -0700 [thread overview]
Message-ID: <402EA47B.2010600@lucent.com> (raw)
In-Reply-To: <402E2841.9020700@jonmasters.org>
All I know is that Xilinx customer support told me that EDK 3.2 and
EDK 6.1 are incompatible with each other. Also be sure to get the
service packs for EDK 6.1 and ISE 6.1. Inside the service packs
was a utility called "revup" which I used to convert my "pre-service pack"
designs to run under 6.1+Service Pack. I think there are instructions
on the Xilinx website where you find the Service Pack telling you how
to upgrade your designs.
-mike wellington
wellington@lucent.com
Jon Masters wrote:
>
>
> Peter Ryser wrote:
>
> | downloads the Linux kernel into main memory, and boots Linux.
>
> Has anyone here had problems with designs that work fine when built with
> EDK 3.2 subsequently falling over completely with EDK 6.1?
>
> At the moment I am debugging a possible issue with memory controller
> logic and would love to hear these are known issues with fixes.
>
> Cheers,
>
> Jon.
>
>
--
=mike wellington
wellington@lucent.com
303.920.6412 Desk
720.434.7559 Cell
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2004-02-14 22:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-11 21:49 ml300 boot loader question Lou Rickard
2004-02-13 15:24 ` Peter Ryser
2004-02-14 13:53 ` Jon Masters
2004-02-14 22:43 ` Mike Wellington [this message]
2004-02-15 11:04 ` Jon Masters
2004-02-18 10:52 ` Jon Masters
2004-02-18 12:34 ` Jon Masters
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=402EA47B.2010600@lucent.com \
--to=wellington@lucent.com \
--cc=jonathan@jonmasters.org \
--cc=linuxppc-embedded@lists.linuxppc.org \
--cc=mike@lo-ex.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).