From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <402EA47B.2010600@lucent.com> Date: Sat, 14 Feb 2004 15:43:07 -0700 From: Mike Wellington MIME-Version: 1.0 To: Jon Masters Cc: linuxppc-embedded@lists.linuxppc.org, wellington@lucent.com, mike@lo-ex.com Subject: Re: ml300 boot loader question References: <20040211214947.87373.qmail@web21110.mail.yahoo.com> <402CEC30.9060503@xilinx.com> <402E2841.9020700@jonmasters.org> In-Reply-To: <402E2841.9020700@jonmasters.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: All I know is that Xilinx customer support told me that EDK 3.2 and EDK 6.1 are incompatible with each other. Also be sure to get the service packs for EDK 6.1 and ISE 6.1. Inside the service packs was a utility called "revup" which I used to convert my "pre-service pack" designs to run under 6.1+Service Pack. I think there are instructions on the Xilinx website where you find the Service Pack telling you how to upgrade your designs. -mike wellington wellington@lucent.com Jon Masters wrote: > > > Peter Ryser wrote: > > | downloads the Linux kernel into main memory, and boots Linux. > > Has anyone here had problems with designs that work fine when built with > EDK 3.2 subsequently falling over completely with EDK 6.1? > > At the moment I am debugging a possible issue with memory controller > logic and would love to hear these are known issues with fixes. > > Cheers, > > Jon. > > -- =mike wellington wellington@lucent.com 303.920.6412 Desk 720.434.7559 Cell ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/