From: Jos Beck II <jos_beck@euronet.nl>
To: "Hegde, Ashok" <Ashok.Hegde@fci.com>
Cc: "Linuxppc-Embedded (E-mail)" <linuxppc-embedded@lists.linuxppc.org>
Subject: Re: How to test Serial data transfer beyond 115k up to 1.5Mbps
Date: Fri, 27 Feb 2004 17:20:48 +0100 [thread overview]
Message-ID: <403F6E60.1010404@euronet.nl> (raw)
In-Reply-To: <903E17B6FF22A24C96B4E28C2C0214D70146BE7E@SR-BNG-EXC01.fci.com>
Hegde, Ashok wrote:
> I want to test my serial driver at higher speeds, How to test serial
> data transfer up to 1.5Mbps speed. Is it zmodem protocol supports this
> speed? I am able to test it (using zmodem protocol )up to 115K, beyond
> this I am facing problem.
You mentioned 115k2, probably an async port.
Do you want to run async at 1,5mbit/s?
What kind of device will that be?
I think the zmodem protocol does not mind to be used at higher rates :o)
Your problem is probably somewhere else. (drivers?)
JB
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2004-02-27 16:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-27 10:25 How to test Serial data transfer beyond 115k up to 1.5Mbps Hegde, Ashok
2004-02-27 16:20 ` Jos Beck II [this message]
2004-02-28 10:22 ` about MPC852T board zjzhou
2004-02-29 16:27 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=403F6E60.1010404@euronet.nl \
--to=jos_beck@euronet.nl \
--cc=Ashok.Hegde@fci.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).