From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <403F6E60.1010404@euronet.nl> Date: Fri, 27 Feb 2004 17:20:48 +0100 From: Jos Beck II MIME-Version: 1.0 To: "Hegde, Ashok" Cc: "Linuxppc-Embedded (E-mail)" Subject: Re: How to test Serial data transfer beyond 115k up to 1.5Mbps References: <903E17B6FF22A24C96B4E28C2C0214D70146BE7E@SR-BNG-EXC01.fci.com> In-Reply-To: <903E17B6FF22A24C96B4E28C2C0214D70146BE7E@SR-BNG-EXC01.fci.com> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hegde, Ashok wrote: > I want to test my serial driver at higher speeds, How to test serial > data transfer up to 1.5Mbps speed. Is it zmodem protocol supports this > speed? I am able to test it (using zmodem protocol )up to 115K, beyond > this I am facing problem. You mentioned 115k2, probably an async port. Do you want to run async at 1,5mbit/s? What kind of device will that be? I think the zmodem protocol does not mind to be used at higher rates :o) Your problem is probably somewhere else. (drivers?) JB ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/