From: Mike Wellington <wellington@lucent.com>
To: linuxppc-embedded@lists.linuxppc.org, wellington@lucent.com,
mike@lo-ex.com
Subject: re: V2Pro/Linux (was PLB UART)
Date: Thu, 11 Mar 2004 06:05:48 -0700 [thread overview]
Message-ID: <4050642C.6070100@lucent.com> (raw)
In-Reply-To: <40501AF3.1020906@cefriel.it>
Roberto-
To get Linux running on the V2Pro, see the following
page. Most of what it says there applies to the Memec board.
http://www.klingauf.de/v2p/index.phtml
In general -
Download the latest 2.4 or 2.6 kernel.
Run the configure program of your choice (make menuconfig, etc)
Configure for XILINX_OCP , PPC40x, ML300
Edit xparameters.h and xparameters_ml300.h to match the
xparameters.h (and therefore the memory map) for your Memec board.
Remake the kernel
Using the Xilinx Parallel IV Cable, load the kernel onto your V2P.
Boot It.
If you want, you can get the latest U-Boot source ,
Configure it for the ML300 if there is no config for the Memec
Replace the xparameters.h file (or whatever its called in the U-Boot tree.
Build U-Boot.
Using whatever debugger you have, load U-Boot into flash if you have any.
Configure a TFTP server on the machine where you built the kernel.
Configure U-Boot to download the kernel and run it.
-mike wellington
mike@lo-ex.com, wellington@lucent.com
Consultant
Global Communications Lab
Bell Labs Division
Lucent Technologies
Roberto Farina wrote:
>
>
> Hi,
> I'm working on a Memec XC2VP7 board with a V2Pro device.
> I'm considering different Linux solutions and I was successful to boot
> uclinux for MicroBlaze.
> Now I'm taking into account PPC-based solutions.
> Can u pls post a little howto on how u success in this?
>
> Thanks in advance
>
> - --------------------------------------------------------
> Roberto Farina
> CEFRIEL - Computer Architectures and Operating Systems
> Via Fucini, 2 - 20133 MILANO (ITALY)
> - --------------------------------------------------------
>
--
=mike wellington
wellington@lucent.com
303.920.6412 Desk
720.434.7559 Cell
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
prev parent reply other threads:[~2004-03-11 13:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-11 7:53 Xilinx PLB UART Roberto Farina
2004-03-11 13:05 ` Mike Wellington [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4050642C.6070100@lucent.com \
--to=wellington@lucent.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
--cc=mike@lo-ex.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).