From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <407EDCF7.2020009@buckeye.ece.drexel.edu> Date: Thu, 15 Apr 2004 15:05:27 -0400 From: Sharad Gupta MIME-Version: 1.0 To: LinuxPPC Subject: Re: System ACE MPU interface to CF card References: <407470ED.3030607@buckeye.ece.drexel.edu> <6058-40021@sneakemail.com> <407ADCFE.8080302@buckeye.ece.drexel.edu> <25757-52278@sneakemail.com> In-Reply-To: <25757-52278@sneakemail.com> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Stephen Williams wrote: > The attached patch demonstrates how I enabled the SYSACE driver > for my (JSE) board. I'm not so sure I'm happy with it, because > each board will have to do something similar. I'm thinking that > the CONFIG_XILINX_SYSACE define should lose its dependence on > CONFIG_XILINX_OCP, but I'm not clear on the best way to account > for this in the xilinx_ocp/Makefile. Thanks Stephen, Your patch helped me a lot in compiling and configuring my kernel. Just on a side note, have you been able to talk to compact flash (mount fs on it, fsck it ?) through system ace ? My kernel hangs while doing partition check on the drive. All I ever see is Partition check: xsysacea: (then nothing happens) I am using SanDisk's 128MB CF card and system ace is configured in the byte mode. Any pointers as to why it is not going ahead will be highly appreciated. Thanks Sharad. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/