* Configuring Both the FECs in MPC880: FEC driver
@ 2004-04-30 9:31 Sanjeev R
2004-04-30 10:46 ` Pantelis Antoniou
0 siblings, 1 reply; 2+ messages in thread
From: Sanjeev R @ 2004-04-30 9:31 UTC (permalink / raw)
To: linuxppc-embedded
Hi,
There are two FECs availbale in MPC880, and i need to use/configure both of them.
I saw the driver code fec.c available in the ELDK distribution, but it supports only one. It has the provision to adapt when an SCC is configured as ethernet,
but when I have to configure two FECs available ?? how do i proceed?
Thanks
Sanjeev
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Configuring Both the FECs in MPC880: FEC driver
2004-04-30 9:31 Configuring Both the FECs in MPC880: FEC driver Sanjeev R
@ 2004-04-30 10:46 ` Pantelis Antoniou
0 siblings, 0 replies; 2+ messages in thread
From: Pantelis Antoniou @ 2004-04-30 10:46 UTC (permalink / raw)
To: Sanjeev R; +Cc: linuxppc-embedded
Sanjeev R wrote:
>Hi,
>
>There are two FECs availbale in MPC880, and i need to use/configure both of them.
>I saw the driver code fec.c available in the ELDK distribution, but it supports only one. It has the provision to adapt when an SCC is configured as ethernet,
>but when I have to configure two FECs available ?? how do i proceed?
>
>Thanks
>Sanjeev
>
>
>
>
>
>
Wait a little bit, I have it my pipeline.
Regards
Pantelis
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-04-30 10:46 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-04-30 9:31 Configuring Both the FECs in MPC880: FEC driver Sanjeev R
2004-04-30 10:46 ` Pantelis Antoniou
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).