From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Bob White" To: linuxppc-embedded@lists.linuxppc.org Date: Mon, 03 May 2004 12:47:43 -0400 MIME-Version: 1.0 Subject: Dual-Port SRAM Message-ID: <40963F6F.31001.1A36BB44@localhost> Content-type: text/plain; charset=US-ASCII Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: I've got a board with a dual-port SRAM attached to the 440GP on the peripheral bus (at CS1_N). I can map the TLB and access the device from the bdi2000 and the u-boot command prompt. What configuration is necessary to map this memory into the kernel? Can you point me to some examples? How does it then get accessed from a user program? Thanks. Bob -- Robert B. White Perigee, A Division of Sensis Corp Software Design Engr 316 Commerce Blvd. TEL: 315.453.7842x29 Liverpool, NY 13088 FAX: 315.453.7917 www.Perigee.com ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/