From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <40B7272A.3070306@ztec.com.br> Date: Fri, 28 May 2004 08:48:58 -0300 From: iida MIME-Version: 1.0 To: linuxppc Subject: Re: how to use the i2c in mpc5200 References: <20040527235651.38E25C109F@atlas.denx.de> In-Reply-To: <20040527235651.38E25C109F@atlas.denx.de> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: i dont think it is the case . I am using a lite5200 version 2.0 with 16 mg of flash And i think the uboot uses the i2c for store some information. Wolfgang Denk wrote: >In message <40B5F176.2020805@ztec.com.br> you wrote: > > >>i am using the linuxppc-2.4.25-denx and loaded >>this modules >> >> > >Which sort of hardware are you using? Is this by any chance an early >IceCube board? I2C didn't work on some of these boards. > >Best regards, > >Wolfgang Denk > >-- >Software Engineering: Embedded and Realtime Systems, Embedded Linux >Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de >Heavier than air flying machines are impossible. > -- Lord Kelvin, President, Royal Society, c. 1895 > > > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/