From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <40EBB6FA.9080009@cefriel.it> Date: Wed, 07 Jul 2004 10:40:26 +0200 From: Roberto Farina Reply-To: linuxppc-embedded@lists.linuxppc.org MIME-Version: 1.0 To: linuxppc-embedded@lists.linuxppc.org Subject: PRoblem with VirtexII Pro: maybe the toolchain? Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hi list, I'm currently trying to make Linux booting on my Memec XC2VP7 board that holds a Xilinx V2Pro device. I'm using gcc version 3.3.2 for ppc405 compiled with crosstool (thx D. Kegel) ;) This toolchain makes me succeded in compiling the kernel; downloading it with xilinx tools brings this output to the serial console loaded at: 00800000 008561C8 board data at: 00085EB4 00085EEC relocated to: 00805308 00805340 zimage at: 00805833 00852A7C avail ram: 00857000 4D046405 Linux/PPC load: Uncompressing Linux...done. Now booting the kernel At this point the system hangs... I'm still trying to figure out where the system stops or what's happening: I'll give more detail when I'll find them :( I'm sorry for the poor info I can give you at this point. I tried to compile the same kernel with the Xilinx toolchain (gcc 2.95.3) but many linking steps require some file that must be copied from the Xilinx EDK prj: after copying them I face lots of multiple definition problems... I stopped this investigation for now. Did anyone experienced the same problems (or knows about a possible reason for this kind of hangs?) Thanks in advance for any help Best regards - --------------------------------------------------------- Roberto Farina CEFRIEL - Digital Technologies and Operating Systems Unit Via Fucini, 2 - 20133 MILANO (ITALY) Phone: +39 02 23954 236 Fax: +39 02 23954 254 ~ 178 606 5693 - --------------------------------------------------------- ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/