* [PATCH 2/3] powerpc/prom: Save the boot CPU hardware id in a local
2018-05-09 13:42 [PATCH 1/3] powerpc/prom: Drop support for old FDT versions Michael Ellerman
@ 2018-05-09 13:42 ` Michael Ellerman
2018-05-09 13:42 ` [PATCH 3/3] powerpc/prom: Clean up local variables in early_init_dt_scan_cpus() Michael Ellerman
2018-05-16 13:38 ` [1/3] powerpc/prom: Drop support for old FDT versions Michael Ellerman
2 siblings, 0 replies; 4+ messages in thread
From: Michael Ellerman @ 2018-05-09 13:42 UTC (permalink / raw)
To: linuxppc-dev
In early_init_dt_scan_cpus() we find the boot CPU, and get it's
hardware CPU number. Currently we do that by using the thread number
and doing be32_to_cpu(instserv[i]) three times.
The endian flips are not very efficient, but the main concern is just
that it's ugly to do the same flip in three places. Instead just put
the endian flipped value in a local and use it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
arch/powerpc/kernel/prom.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 05e7fb47a7a4..9edb0d0af986 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -313,8 +313,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
const __be32 *intserv;
int i, nthreads;
int len;
- int found = -1;
- int found_thread = 0;
+ int found = -1, found_hwid = -1;
/* We are scanning "cpu" nodes only */
if (type == NULL || strcmp(type, "cpu") != 0)
@@ -332,11 +331,9 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
* NOTE: This must match the parsing done in smp_setup_cpu_maps.
*/
for (i = 0; i < nthreads; i++) {
- if (be32_to_cpu(intserv[i]) ==
- fdt_boot_cpuid_phys(initial_boot_params)) {
+ found_hwid = be32_to_cpu(intserv[i]);
+ if (found_hwid == fdt_boot_cpuid_phys(initial_boot_params))
found = boot_cpu_count;
- found_thread = i;
- }
#ifdef CONFIG_SMP
/* logical cpu id is always 0 on UP kernels */
boot_cpu_count++;
@@ -347,8 +344,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
if (found < 0)
return 0;
- DBG("boot cpu: logical %d physical %d\n", found,
- be32_to_cpu(intserv[found_thread]));
+ DBG("boot cpu: logical %d physical %d\n", found, found_hwid);
boot_cpuid = found;
/*
@@ -389,7 +385,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
allocate_paca(boot_cpuid);
#endif
- set_hard_smp_processor_id(found, be32_to_cpu(intserv[found_thread]));
+ set_hard_smp_processor_id(found, found_hwid);
return 0;
}
--
2.14.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 3/3] powerpc/prom: Clean up local variables in early_init_dt_scan_cpus()
2018-05-09 13:42 [PATCH 1/3] powerpc/prom: Drop support for old FDT versions Michael Ellerman
2018-05-09 13:42 ` [PATCH 2/3] powerpc/prom: Save the boot CPU hardware id in a local Michael Ellerman
@ 2018-05-09 13:42 ` Michael Ellerman
2018-05-16 13:38 ` [1/3] powerpc/prom: Drop support for old FDT versions Michael Ellerman
2 siblings, 0 replies; 4+ messages in thread
From: Michael Ellerman @ 2018-05-09 13:42 UTC (permalink / raw)
To: linuxppc-dev
This is cosmetic, but the current arrangement is hell ugly, so clean
it up.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
arch/powerpc/kernel/prom.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 9edb0d0af986..0e47fb85f47d 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -308,12 +308,11 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
const char *uname, int depth,
void *data)
{
- const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
- const __be32 *prop;
- const __be32 *intserv;
- int i, nthreads;
- int len;
- int found = -1, found_hwid = -1;
+ int i, len, nthreads, found_hwid, found;
+ const __be32 *prop, *intserv;
+ const char *type;
+
+ type = of_get_flat_dt_prop(node, "device_type", NULL);
/* We are scanning "cpu" nodes only */
if (type == NULL || strcmp(type, "cpu") != 0)
@@ -330,6 +329,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
* Now see if any of these threads match our boot cpu.
* NOTE: This must match the parsing done in smp_setup_cpu_maps.
*/
+ found = found_hwid = -1;
for (i = 0; i < nthreads; i++) {
found_hwid = be32_to_cpu(intserv[i]);
if (found_hwid == fdt_boot_cpuid_phys(initial_boot_params))
--
2.14.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [1/3] powerpc/prom: Drop support for old FDT versions
2018-05-09 13:42 [PATCH 1/3] powerpc/prom: Drop support for old FDT versions Michael Ellerman
2018-05-09 13:42 ` [PATCH 2/3] powerpc/prom: Save the boot CPU hardware id in a local Michael Ellerman
2018-05-09 13:42 ` [PATCH 3/3] powerpc/prom: Clean up local variables in early_init_dt_scan_cpus() Michael Ellerman
@ 2018-05-16 13:38 ` Michael Ellerman
2 siblings, 0 replies; 4+ messages in thread
From: Michael Ellerman @ 2018-05-16 13:38 UTC (permalink / raw)
To: Michael Ellerman, linuxppc-dev
On Wed, 2018-05-09 at 13:42:27 UTC, Michael Ellerman wrote:
> In commit e6a6928c3ea1 ("of/fdt: Convert FDT functions to use
> libfdt") (Apr 2014), the generic flat device tree code dropped support
> for flat device tree's older than version 0x10 (16).
>
> We still have code in our CPU scanning to cope with flat device tree
> versions earlier than 2, which can now never trigger, so drop it.
>
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Applied to powerpc next.
https://git.kernel.org/powerpc/c/89c190627257a38d5e4d7cb3e5382f
cheers
^ permalink raw reply [flat|nested] 4+ messages in thread