From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from amsfep15-int.chello.nl (amsfep15-int.chello.nl [213.46.243.28]) by ozlabs.org (Postfix) with ESMTP id 9E2FB67A46 for ; Thu, 3 Feb 2005 21:28:08 +1100 (EST) Received: from [192.168.0.27] (really [80.216.174.242]) by amsfep13-int.chello.nl (InterMail vM.6.01.03.04 201-2131-111-106-20040729) with ESMTP id <20050203100928.MSLB11192.amsfep13-int.chello.nl@[192.168.0.27]> for ; Thu, 3 Feb 2005 11:09:28 +0100 Message-ID: <4201F956.1050702@bitsim.com> Date: Thu, 03 Feb 2005 11:13:42 +0100 From: Jakob Viketoft MIME-Version: 1.0 To: linuxppc-embedded@ozlabs.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Subject: Linux on Virtex-II Pro P20 development board... List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello everyone! I've just started trying to get the Linux (2.6.8.1) kernel to run on the above mentioned board (or, specifically, a PPC405 on the Xilinx Virtex-II Pro 2VP20). I just figured I'd ask around and see if any of you have got this board running and then what kernel modifications where necessary and IP blocks (from the development kit) you've used. At the moment I'm primarily interested in the PPC and a serial port, later on the TP port will be useful as well. I've previously ported the 2.4.x kernel to Cirrus Logic EP7312 (ARM) chip, but that was some years ago and with the new kernel, chip and structure of the PPC arch of the kernel I'm a bit disoriented. Any help would be greatly appreciated! Regards, /Jakob