From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.apes.fr (unknown [80.125.80.241]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTP id CCF0167A6E for ; Wed, 23 Feb 2005 19:52:00 +1100 (EST) Received: from [172.24.10.13] (jose.apes.fr [172.24.10.13]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.apes.fr (Postfix) with ESMTP id 91C16634397 for ; Wed, 23 Feb 2005 09:51:50 +0100 (CET) Message-ID: <421C4426.1040609@apes.fr> Date: Wed, 23 Feb 2005 09:51:50 +0100 From: Jose Almeida MIME-Version: 1.0 To: linuxppc-embedded@ozlabs.org References: <421B0C70.1070301@apes.fr> In-Reply-To: <421B0C70.1070301@apes.fr> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Subject: Re: FCC on 8560 ADS List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , All, Please cancel this request, I found the problem. I had a switch (SW4) with the wrong setup. Thanks - Jose Jose Almeida wrote: > All, > > I'm trying to get a linux 2.6 kernel up and running on an freescale > 8560 ADS board. I have every peace of this up and running apart from > the FCC ethernet. > > I've switched to the legacy mode, which now allow me to talk to the > PHY and negocite properly @ 100BT FD. > > But I don't seem to get any ethernet packet going out. The FCC > controller does not seem to read the BDs, and all the packet's I'm > placing in the BD just stay there for ever ! > > I'm wondering if you have a driver which works properlly ? I'm > thinking on some wrong setup in the ioports, but is all seems to be > correct ! > > I'm using a 2.6.9 kernel, but I also tryed other versions (2.6.11r4), > with the same problems ... > > Thanks > Jose > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > >