From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail66-res-R.bigfish.com (mail-res.bigfish.com [63.161.60.61]) (using TLSv1 with cipher EDH-RSA-DES-CBC3-SHA (168/168 bits)) (Client CN "*.bigfish.com", Issuer "*.bigfish.com" (not verified)) by ozlabs.org (Postfix) with ESMTP id B706167B22 for ; Fri, 29 Apr 2005 00:40:01 +1000 (EST) Message-ID: <4270F04E.9010305@xilinx.com> Date: Thu, 28 Apr 2005 07:16:46 -0700 From: Peter Ryser MIME-Version: 1.0 To: "Peter 'p2' De Schrijver" References: <20050428094716.GA17582@mind.be> In-Reply-To: <20050428094716.GA17582@mind.be> Content-Type: text/plain; charset=us-ascii; format=flowed Cc: linuxppc-embedded@ozlabs.org Subject: Re: connecting BDI2000 to ML403 List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , If your debugger needs nTRST and HALT you can route the JTAG signals of the PPC405 processor through user IO pins to the expansion connector. - Peter Peter 'p2' De Schrijver wrote: >Hi, > >I'm trying to figure out how to connect the BDI 2000 with a Xilinx ML403 >development board. As far as I can see in the ML403 schematics, the JTAG >connector lacks the nTRST and the HALT signals needed for JTAG >debugging. Any ideas ? > >Thanks, > >Peter (p2). > > >------------------------------------------------------------------------ > >_______________________________________________ >Linuxppc-embedded mailing list >Linuxppc-embedded@ozlabs.org >https://ozlabs.org/mailman/listinfo/linuxppc-embedded >