From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from moutvdomng.kundenserver.de (moutvdom.kundenserver.de [212.227.126.249]) by ozlabs.org (Postfix) with ESMTP id B25E6679F7 for ; Tue, 24 May 2005 19:01:27 +1000 (EST) Message-ID: <4292ED43.8060607@anagramm.de> Date: Tue, 24 May 2005 11:00:51 +0200 From: Clemens Koller MIME-Version: 1.0 To: Alex Zeffertt References: <20050523145953.3a2044ef.ajz@cambridgebroadband.com> In-Reply-To: <20050523145953.3a2044ef.ajz@cambridgebroadband.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Cc: "linux-atm-general@lists.sourceforge.net" , linuxppc-embedded@ozlabs.org Subject: Re: Memory mapping the PHY on CR826 List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello, FYI: This is a board based on the Freescale MPC8260 processor. Greets, Clemens Alex Zeffertt wrote: > Hi all, > > Does anyone here have *any* code for memory mapping the PM5350 ATM phy > on the Microsys CR826 board? > > I've just purchased this board from Microsys and I'm trying to get the > atm8260 ATM device driver to work on it - unfortunately I cannot seem to > memory map the phy. My current settings are: > > > memctl->memc_or8 = 0xe0400ef4; // base 0xe0400000; default timings > memctl->memc_br8 = 0xffff8821; // min banksize; 8bit port; GPCM local; > // bank valid > > Has anybody done this already? > > TIA, > > Alex > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded >