From: Vitaly Bordug <vbordug@ru.mvista.com>
To: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Cc: Kumar Gala <galak@freescale.com>,
linuxppc-embedded list <linuxppc-embedded@ozlabs.org>
Subject: [PATCH] ppc32: 8xx pq platform system descriptions
Date: Fri, 19 Aug 2005 23:01:49 +0400 [thread overview]
Message-ID: <43062C9D.5060703@ru.mvista.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 146 bytes --]
Added ppc_sys device and system definitions for PowerQUICC I devices.
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
--
Sincerely,
Vitaly
[-- Attachment #2: 8xx_plats.diff --]
[-- Type: text/x-patch, Size: 8911 bytes --]
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -34,7 +34,8 @@ ifeq ($(CONFIG_40x),y)
obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o ppc405_pci.o
endif
endif
-obj-$(CONFIG_8xx) += m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y)
+obj-$(CONFIG_8xx) += m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \
+ ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o
ifeq ($(CONFIG_8xx),y)
obj-$(CONFIG_PCI) += qspan_pci.o i8259.o
endif
diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c
new file mode 100644
--- /dev/null
+++ b/arch/ppc/syslib/mpc8xx_devices.c
@@ -0,0 +1,231 @@
+/*
+ * arch/ppc/syslib/mpc8xx_devices.c
+ *
+ * MPC8xx Device descriptions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug<vbordug@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/serial_8250.h>
+#include <linux/mii.h>
+#include <asm/commproc.h>
+#include <asm/mpc8xx.h>
+#include <asm/irq.h>
+#include <asm/ppc_sys.h>
+
+/* access ports */
+#define setbits32(_addr, _v) out_be32(&(_addr), in_be32(&(_addr)) | (_v))
+#define clrbits32(_addr, _v) out_be32(&(_addr), in_be32(&(_addr)) & ~(_v))
+
+#define setbits16(_addr, _v) out_be16(&(_addr), in_be16(&(_addr)) | (_v))
+#define clrbits16(_addr, _v) out_be16(&(_addr), in_be16(&(_addr)) & ~(_v))
+
+/* We use offsets for IORESOURCE_MEM to do not set dependences at compile time.
+ * They will get fixed up by mach_mpc8xx_fixup
+ */
+
+struct platform_device ppc_sys_platform_devices[] = {
+ [MPC8xx_CPM_FEC1] = {
+ .name = "fsl-cpm-fec",
+ .id = 1,
+ .num_resources = 2,
+ .resource = (struct resource[]) {
+ {
+ .name = "regs",
+ .start = 0xe00,
+ .end = 0xe88,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "interrupt",
+ .start = MPC8xx_INT_FEC1,
+ .end = MPC8xx_INT_FEC1,
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC8xx_CPM_FEC2] = {
+ .name = "fsl-cpm-fec",
+ .id = 2,
+ .num_resources = 2,
+ .resource = (struct resource[]) {
+ {
+ .name = "regs",
+ .start = 0x1e00,
+ .end = 0x1e88,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "interrupt",
+ .start = MPC8xx_INT_FEC2,
+ .end = MPC8xx_INT_FEC2,
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC8xx_CPM_SCC1] = {
+ .name = "fsl-cpm-scc",
+ .id = 1,
+ .num_resources = 3,
+ .resource = (struct resource[]) {
+ {
+ .name = "regs",
+ .start = 0xa00,
+ .end = 0xa18,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "pram",
+ .start = 0x3c00,
+ .end = 0x3c80,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "interrupt",
+ .start = MPC8xx_INT_SCC1,
+ .end = MPC8xx_INT_SCC1,
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC8xx_CPM_SCC2] = {
+ .name = "fsl-cpm-scc",
+ .id = 2,
+ .num_resources = 3,
+ .resource = (struct resource[]) {
+ {
+ .name = "regs",
+ .start = 0xa20,
+ .end = 0xa38,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "pram",
+ .start = 0x3d00,
+ .end = 0x3d80,
+ .flags = IORESOURCE_MEM,
+ },
+
+ {
+ .name = "interrupt",
+ .start = MPC8xx_INT_SCC2,
+ .end = MPC8xx_INT_SCC2,
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC8xx_CPM_SCC3] = {
+ .name = "fsl-cpm-scc",
+ .id = 3,
+ .num_resources = 3,
+ .resource = (struct resource[]) {
+ {
+ .name = "regs",
+ .start = 0xa40,
+ .end = 0xa58,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "pram",
+ .start = 0x3e00,
+ .end = 0x3e80,
+ .flags = IORESOURCE_MEM,
+ },
+
+ {
+ .name = "interrupt",
+ .start = MPC8xx_INT_SCC3,
+ .end = MPC8xx_INT_SCC3,
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC8xx_CPM_SCC4] = {
+ .name = "fsl-cpm-scc",
+ .id = 4,
+ .num_resources = 3,
+ .resource = (struct resource[]) {
+ {
+ .name = "regs",
+ .start = 0xa60,
+ .end = 0xa78,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "pram",
+ .start = 0x3f00,
+ .end = 0x3f80,
+ .flags = IORESOURCE_MEM,
+ },
+
+ {
+ .name = "interrupt",
+ .start = MPC8xx_INT_SCC4,
+ .end = MPC8xx_INT_SCC4,
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC8xx_CPM_SMC1] = {
+ .name = "fsl-cpm-smc",
+ .id = 1,
+ .num_resources = 2,
+ .resource = (struct resource[]) {
+ {
+ .name = "regs",
+ .start = 0xa82,
+ .end = 0xa91,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "interrupt",
+ .start = MPC8xx_INT_SMC1,
+ .end = MPC8xx_INT_SMC1,
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC8xx_CPM_SMC2] = {
+ .name = "fsl-cpm-smc",
+ .id = 2,
+ .num_resources = 2,
+ .resource = (struct resource[]) {
+ {
+ .name = "regs",
+ .start = 0xa92,
+ .end = 0xaa1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "interrupt",
+ .start = MPC8xx_INT_SMC2,
+ .end = MPC8xx_INT_SMC2,
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+};
+
+static int __init mach_mpc8xx_fixup(struct platform_device *pdev)
+{
+ ppc_sys_fixup_mem_resource (pdev, IMAP_ADDR);
+ return 0;
+}
+
+static int __init mach_mpc8xx_init(void)
+{
+ ppc_sys_device_fixup = mach_mpc8xx_fixup;
+ return 0;
+}
+
+postcore_initcall(mach_mpc8xx_init);
diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c
new file mode 100644
--- /dev/null
+++ b/arch/ppc/syslib/mpc8xx_sys.c
@@ -0,0 +1,61 @@
+/*
+ * arch/ppc/platforms/mpc8xx_sys.c
+ *
+ * MPC8xx System descriptions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <asm/ppc_sys.h>
+
+struct ppc_sys_spec *cur_ppc_sys_spec;
+struct ppc_sys_spec ppc_sys_specs[] = {
+ {
+ .ppc_sys_name = "MPC86X",
+ .mask = 0xFFFFFFFF,
+ .value = 0x00000000,
+ .num_devices = 2,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC8xx_CPM_FEC1,
+ MPC8xx_CPM_SCC1,
+ MPC8xx_CPM_SCC2,
+ MPC8xx_CPM_SCC3,
+ MPC8xx_CPM_SCC4,
+ MPC8xx_CPM_SMC1,
+ MPC8xx_CPM_SMC2,
+ },
+ },
+ {
+ .ppc_sys_name = "MPC885",
+ .mask = 0xFFFFFFFF,
+ .value = 0x00000000,
+ .num_devices = 3,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC8xx_CPM_FEC1,
+ MPC8xx_CPM_FEC2,
+ MPC8xx_CPM_SCC1,
+ MPC8xx_CPM_SCC2,
+ MPC8xx_CPM_SCC3,
+ MPC8xx_CPM_SCC4,
+ MPC8xx_CPM_SMC1,
+ MPC8xx_CPM_SMC2,
+ },
+ },
+ { /* default match */
+ .ppc_sys_name = "",
+ .mask = 0x00000000,
+ .value = 0x00000000,
+ },
+};
diff --git a/include/asm-ppc/irq.h b/include/asm-ppc/irq.h
--- a/include/asm-ppc/irq.h
+++ b/include/asm-ppc/irq.h
@@ -133,6 +133,16 @@ irq_canonicalize(int irq)
#define SIU_IRQ7 (14)
#define SIU_LEVEL7 (15)
+#define MPC8xx_INT_FEC1 SIU_LEVEL1
+#define MPC8xx_INT_FEC2 SIU_LEVEL3
+
+#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1)
+#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2)
+#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3)
+#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4)
+#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1)
+#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2)
+
/* The internal interrupts we can configure as we see fit.
* My personal preference is CPM at level 2, which puts it above the
* MBX PCI/ISA/IDE interrupts.
diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h
--- a/include/asm-ppc/mpc8xx.h
+++ b/include/asm-ppc/mpc8xx.h
@@ -101,6 +101,22 @@ extern unsigned char __res[];
struct pt_regs;
+enum ppc_sys_devices {
+ MPC8xx_CPM_FEC1,
+ MPC8xx_CPM_FEC2,
+ MPC8xx_CPM_I2C,
+ MPC8xx_CPM_SCC1,
+ MPC8xx_CPM_SCC2,
+ MPC8xx_CPM_SCC3,
+ MPC8xx_CPM_SCC4,
+ MPC8xx_CPM_SPI,
+ MPC8xx_CPM_MCC1,
+ MPC8xx_CPM_MCC2,
+ MPC8xx_CPM_SMC1,
+ MPC8xx_CPM_SMC2,
+ MPC8xx_CPM_USB,
+};
+
#endif /* !__ASSEMBLY__ */
#endif /* CONFIG_8xx */
#endif /* __CONFIG_8xx_DEFS */
diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h
--- a/include/asm-ppc/ppc_sys.h
+++ b/include/asm-ppc/ppc_sys.h
@@ -25,6 +25,8 @@
#include <asm/mpc83xx.h>
#elif defined(CONFIG_85xx)
#include <asm/mpc85xx.h>
+#elif defined(CONFIG_8xx)
+#include <asm/mpc8xx.h>
#elif defined(CONFIG_PPC_MPC52xx)
#include <asm/mpc52xx.h>
#elif defined(CONFIG_MPC10X_BRIDGE)
next reply other threads:[~2005-08-19 19:01 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-19 19:01 Vitaly Bordug [this message]
2005-08-19 20:14 ` [PATCH] ppc32: 8xx pq platform system descriptions Kumar Gala
2005-08-21 23:55 ` Marcelo Tosatti
2005-08-22 1:28 ` Dan Malek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43062C9D.5060703@ru.mvista.com \
--to=vbordug@ru.mvista.com \
--cc=galak@freescale.com \
--cc=linuxppc-embedded@ozlabs.org \
--cc=marcelo.tosatti@cyclades.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).