* porting xenomaii for power pc 750Cxe based SBC
@ 2008-02-07 12:11 rakesh bk
2008-02-09 16:11 ` Wolfgang Grandegger
0 siblings, 1 reply; 2+ messages in thread
From: rakesh bk @ 2008-02-07 12:11 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 2737 bytes --]
Hello Everyone,
Iam Trying to port the xenomai-2.2.0 using the "
adeos-ipipe-2.6.14-ppc-1.3-05.patch" to linux-kernel 2.6.14( Vanilla) to
our custom based SBC, After applying patches as i get Enough printk's on my
console , I get Stucked after UNMASKING of Ethernet Irq The following are
the printk messages after i tried to boot the image. can i know what the
actual problem is ...........
These are the following printks, which i get ,
ATSLinux:eth0:none console=ttyS0,9600 ip1=off
Initializing init_irq
PID hash table entries: 1024 (order: 10, 16384 bytes)
time_init: decrementer frequency = 17.000000 MHz
Warning: real time clock seems stuck!
I-pipe 1.3-05: pipeline enabled.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 125440k available (2716k kernel code, 1200k data, 148k init, 0k
highmem)
Mount-cache hash table entries: 512
softlockup thread 0 started up.
NET: Registered protocol family 16
PCI: Probing PCI hardware
Xenomai: ALTIVEC support enabled in kernel but no hardware found.
Disable CONFIG_ALTIVEC in the kernel configuration.
Xenomai: system init failed, code -19.
Xenomai: native skin init failed, code -19.
Xenomai: starting POSIX services.
Xenomai: POSIX skin init failed, code -19.
Xenomai: RTDM skin init failed, code -19.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 85) is a 16550A
ttyS1 at MMIO 0x0 (irq = 86) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
eth%d: Couldn't Read Srom MAC address
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
physmap flash device: 10000 at f6000000
Generic platform RAM MTD, (c) 2004 Simtec Electronics
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Entering The Ethernet device : <NULL>
UNMasking of Eth interrupt ( After generating the interrupt ).
Retval of irq32 is : 0
gt64260_eth_open : Assigned IRQ 32 to gt64260_eth0
[-- Attachment #2: Type: text/html, Size: 3057 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: porting xenomaii for power pc 750Cxe based SBC
2008-02-07 12:11 porting xenomaii for power pc 750Cxe based SBC rakesh bk
@ 2008-02-09 16:11 ` Wolfgang Grandegger
0 siblings, 0 replies; 2+ messages in thread
From: Wolfgang Grandegger @ 2008-02-09 16:11 UTC (permalink / raw)
To: rakesh bk; +Cc: linuxppc-embedded
rakesh bk wrote:
> Hello Everyone,
>
> Iam Trying to port the xenomai-2.2.0 using the
> "adeos-ipipe-2.6.14-ppc-1.3-05.patch" to linux-kernel 2.6.14( Vanilla)
> to our custom based SBC, After applying patches as i get Enough printk's
> on my console , I get Stucked after UNMASKING of Ethernet Irq The
> following are the printk messages after i tried to boot the image. can i
> know what the actual problem is ...........
This mail is off topic. Please repost on the Xenomai-help mailing list
(https://gna.org/mail/?group=xenomai). As you can see from your boot
log, already the Xenomai initialization fails.
Wolfgang.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-02-09 16:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-02-07 12:11 porting xenomaii for power pc 750Cxe based SBC rakesh bk
2008-02-09 16:11 ` Wolfgang Grandegger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).