From: Nathael PAJANI <nathael.pajani@cpe.fr>
To: linuxppc-embedded@ozlabs.org
Subject: Three-Speed Ethernet support on MPC8560 (TSEC)
Date: Fri, 21 Oct 2005 18:05:10 +0200 [thread overview]
Message-ID: <435911B6.9070600@cpe.fr> (raw)
Kumar Gala wrote:
>> I will now go on with the Three-Speed Ethernet Controler, and there
>> actually seem to be no support for it, but maybe I did not look at
>> the right place?
>
>
> The TSEC has been supported for a long time. The driver is call
> gianfar (drivers/net/gianfar*).
>
OK, I found it, and remembered that at the begining of the port I
wondered what the "struct platform_device ppc_sys_platform_devices[]"
was for, now I know. and I'll try this for the FCC3 too.
There is a problem though, which I already had (and fixed) with the
boot-loader: The gigabit ethernet is not set up correctly: Everything is
fine with a Gigabit switch, but with a Fast ethernet switch there is no
communication.
I'll look for this on monday!
Thanks a lot for the help !
next reply other threads:[~2005-10-21 16:03 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-21 16:05 Nathael PAJANI [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-10-21 12:21 Three-Speed Ethernet support on MPC8560 (TSEC) Nathael PAJANI
2005-10-21 13:39 ` Kumar Gala
2005-10-21 17:18 ` Pantelis Antoniou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=435911B6.9070600@cpe.fr \
--to=nathael.pajani@cpe.fr \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).