From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from smtp-out.completel.net (smtp-out.completel.net [83.145.110.35]) by ozlabs.org (Postfix) with ESMTP id 2598868651 for ; Sat, 22 Oct 2005 02:03:30 +1000 (EST) Received: from [192.52.109.152] (unknown [83.145.98.3]) by smtp-out.completel.net (Postfix) with ESMTP id 8307825C05D for ; Fri, 21 Oct 2005 18:03:25 +0200 (CEST) Message-ID: <435911B6.9070600@cpe.fr> Date: Fri, 21 Oct 2005 18:05:10 +0200 From: Nathael PAJANI MIME-Version: 1.0 To: linuxppc-embedded@ozlabs.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Subject: Three-Speed Ethernet support on MPC8560 (TSEC) List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Kumar Gala wrote: >> I will now go on with the Three-Speed Ethernet Controler, and there >> actually seem to be no support for it, but maybe I did not look at >> the right place? > > > The TSEC has been supported for a long time. The driver is call > gianfar (drivers/net/gianfar*). > OK, I found it, and remembered that at the begining of the port I wondered what the "struct platform_device ppc_sys_platform_devices[]" was for, now I know. and I'll try this for the FCC3 too. There is a problem though, which I already had (and fixed) with the boot-loader: The gigabit ethernet is not set up correctly: Everything is fine with a Gigabit switch, but with a Fast ethernet switch there is no communication. I'll look for this on monday! Thanks a lot for the help !