* Problems with fcc_enet driver for MPC8248 (2.6.12)
@ 2005-11-17 23:39 Carlos Munoz
0 siblings, 0 replies; only message in thread
From: Carlos Munoz @ 2005-11-17 23:39 UTC (permalink / raw)
To: linuxppc-embedded
I'm working on an embedded board that is currently running kernel 2.4.28
without any problems. However, I am trying to upgrade from kernel 2.4.28
to kernel 2.6.12 and I'm unable to get the fcc_enet driver to work
properly.
The fcc ports are connected to ethernet phy devices. The receive and
transmitted data out of the ethernet phy devices is all 0xff.
I tried using the fcc_enet driver from the 2.4.28 kernel on the 2.6.12
kernel but get the same results. This leads me to believe that the core
initialization of the MPC8248 has changed on kernel 2.6.12.
Has anyone got the fcc ports to work properly on the 2.6.12 kernel ? If
yes, how ? Did the MPC8248 core initialization change ?
Thanks,
Carlos Munoz
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-11-18 0:00 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-11-17 23:39 Problems with fcc_enet driver for MPC8248 (2.6.12) Carlos Munoz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).