From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from xm.dlasys.net (unknown [24.152.213.223]) (using TLSv1 with cipher AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTP id 417A4689AD for ; Thu, 5 Jan 2006 10:27:09 +1100 (EST) Received: from [206.223.20.50] (port=49926 helo=[206.223.20.50]) by xm.dlasys.net with esmtp (Exim 4.54 #1 (Debian)) id 1Eue2x-00053x-Ml for ; Thu, 05 Jan 2006 17:57:27 -0500 Message-ID: <43BC57E7.40408@dlasys.net> Date: Wed, 04 Jan 2006 18:19:03 -0500 From: "David H. Lynch Jr." MIME-Version: 1.0 To: linuxppc-embedded@ozlabs.org References: <20051208231947.92EB9353F77@atlas.denx.de> In-Reply-To: <20051208231947.92EB9353F77@atlas.denx.de> Content-Type: text/plain; charset=ISO-8859-1 Subject: RESEND:Problems starting /init List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , I have a kernel for a new board (Linux 2.6.14.5, Pico E12/Xilinx V4 PPC405) booting to the point of starting /init. /init appears to be getting loaded correctly - the execve call seems happy. But I get no output on the console. I have tried: executing sys_write(1,"Test",4); inside init/main.c immediately before starting /init - works fine. starting a "hello World" application written in PPC asm as /init - works fine. The kernel panics on exit but that is normal, /init is not supposed to exit. starting a c "Hello World" application that uses glibc, fputs, printf, fwrite, to display a string - again works fine. But I can not get busybox to output a thing either run as /init or run as /bin/sh. I have aslo tried /bin/sash - no output. I have even cross compiled sash - with all kinds of "I am here" debugging scattered through main(), If I runn it on a powerbook, I get what I expect. If I run it as /bin/sh on the e12 I get no output. Does anyone even have any ideas what I can look at ?