* [PATCH] Add support for Freescale 83xx Host Mode USB
@ 2006-01-18 18:54 Randy Vinson
2006-01-19 0:18 ` Kumar Gala
0 siblings, 1 reply; 3+ messages in thread
From: Randy Vinson @ 2006-01-18 18:54 UTC (permalink / raw)
To: linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 837 bytes --]
Greetings,
I've attached a patch (based on 2.6.16-rc1) which adds Host mode
support for the Dual-Role(DR) and Multi-Port-Host (MPH) USB controllers
found in the Freescale 8349. Note that this patch only provides the
platform-specific code that sets up the external hardware and pin
configuration. The actual DR and MPH controller driver is being posted
on the linux-usb-devel mailing list.
Using a Freescale 8349CDS reference board, the DR controller was
successfully tested using a USB 2.0 high speed FLASH drive, a USB 1.1
full speed 4-port hub and a Siemens SpeedStream USB to Ethernet adapter.
The MPH controller has been successfully tested with a USB 2.0 high
speed FLASH drive. Attempts to run USB 1.1 devices with the MPH
controller have proven unsuccessful.
Randy Vinson
MontaVista Software
[-- Attachment #2: 8349_usb_platform.patch --]
[-- Type: text/plain, Size: 8580 bytes --]
Adding platform support for the 834x Host Mode USB controller.
This patch provides the platform-specific hardware setup required by the
83xx Host Mode USB controller on the Freescale 8349CDS reference system.
Signed-off-by: Randy Vinson <rvinson@mvista.com>
---
commit 30b1d2d35237f0367aeceb1bc9f62c9fdc46dbff
tree 64af0c1897f30bb1adb72ecbb6f4c4d0ef619639
parent 2581e186c343cd26802279bd80e420307037fbc6
author Randy Vinson <rvinson@linuxbox.(none)> Tue, 17 Jan 2006 16:32:23 -0700
committer Randy Vinson <rvinson@linuxbox.(none)> Tue, 17 Jan 2006 16:32:23 -0700
arch/ppc/Kconfig | 2 +
arch/ppc/platforms/83xx/Kconfig | 28 +++++++++
arch/ppc/platforms/83xx/mpc834x_sys.c | 100 +++++++++++++++++++++++++++++++++
arch/ppc/platforms/83xx/mpc834x_sys.h | 3 +
arch/ppc/syslib/mpc83xx_devices.c | 16 +++++
include/asm-ppc/mpc83xx.h | 17 ++++++
6 files changed, 166 insertions(+), 0 deletions(-)
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 11899f0..b33b0eb 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -681,6 +681,8 @@ config EV64360
platform.
endchoice
+source arch/ppc/platforms/83xx/Kconfig
+
config PQ2ADS
bool
depends on ADS8272
diff --git a/arch/ppc/platforms/83xx/Kconfig b/arch/ppc/platforms/83xx/Kconfig
new file mode 100644
index 0000000..90bc67a
--- /dev/null
+++ b/arch/ppc/platforms/83xx/Kconfig
@@ -0,0 +1,28 @@
+config 834x_USB_SUPPORT
+ bool "834x USB Support"
+ depends on MPC834x_SYS
+ default y
+ ---help---
+ Enables support for the USB controllers on the MPC834x chip. The 834x
+ reference board is wired for only one USB port. That port may be
+ used by either the MPH or DR USB controller.
+ Requires USB Host EHCI support.
+ If unsure, say Y.
+choice
+ prompt "834x USB Controller Selection"
+ depends on 834x_USB_SUPPORT
+ default 834x_DR_USB_SUPPORT
+
+config 834x_DR_USB_SUPPORT
+ bool "DR Controller"
+ select USB_EHCI_ROOT_HUB_TT
+ ---help---
+ Select if using the Dual-Role (DR) USB controller.
+
+config 834x_MPH_USB_SUPPORT
+ bool "MPH Controller"
+ ---help---
+ Select if using the Multi-Port-Host (MPH) USB controller.
+
+endchoice
+
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c
index 012e1e6..6f23909 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.c
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.c
@@ -11,6 +11,9 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
+ * USB setup added by Randy Vinson <rvinson@mvista.com> based on code from
+ * Hunter Wu.
*/
#include <linux/config.h>
@@ -93,6 +96,99 @@ mpc83xx_exclude_device(u_char bus, u_cha
}
#endif /* CONFIG_PCI */
+/*
+ * Configure the on-chip USB controller. The MPC834xCDS only supports the
+ * second USB interface (port 1). This code sets up the hardware and then
+ * lets the platform driver take over device setup.
+ */
+
+#ifdef CONFIG_834x_USB_SUPPORT
+void mpc834x_board_init(void)
+{
+ unsigned char __iomem *bcsr;
+ volatile unsigned char *bcsr5_p;
+
+ /*
+ * if SYS board is plug into PIB board,
+ * force to use the PHY on SYS board
+ * */
+ bcsr = ioremap(BCSR_PHYS_ADDR, BCSR_SIZE);
+ bcsr5_p = bcsr + BCSR5_OFF;
+ if ( (*bcsr5_p & BCSR5_INT_USB) == 0 )
+ *bcsr5_p = (*bcsr5_p | BCSR5_INT_USB);
+ iounmap(bcsr);
+}
+
+void mpc834x_usb_clk_cfg(void)
+{
+ unsigned long sccr;
+ volatile unsigned long *p;
+
+ p = (volatile unsigned long *)(VIRT_IMMRBAR + MPC83XX_SCCR_OFFS); /* SCCR */
+ sccr = *p;
+
+ sccr |= MPC83XX_SCCR_USB_MPHCM_11 | MPC83XX_SCCR_USB_DRCM_11;
+
+ *p = sccr;
+}
+
+static void mpc834x_usb_pin_cfg(struct fsl_usb2_platform_data *pdata)
+{
+ unsigned long sicrl;
+ volatile unsigned long *p;
+
+ p = (volatile unsigned long *)(VIRT_IMMRBAR + MPC83XX_SICRL_OFFS); /* SCCR */
+ sicrl = *p;
+
+ /* set both ports to MPH mode */
+ sicrl &= ~(MPC83XX_SICRL_USB0 | MPC83XX_SICRL_USB1);
+
+ if (pdata->operating_mode == FSL_USB2_DR_HOST) {
+ if (pdata->phy_mode == FSL_USB2_PHY_UTMI_WIDE) {
+ /* UTMI WIDE combines both ports into a single 16-bit port */
+ sicrl |= MPC83XX_SICRL_USB0 | MPC83XX_SICRL_USB1;
+ }
+ else {
+ if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
+ sicrl |= MPC83XX_SICRL_USB0;
+ }
+ }
+ *p = sicrl;
+}
+
+static void __init
+mpc834x_usb_init(void)
+{
+ struct fsl_usb2_platform_data *pdata;
+
+#ifdef CONFIG_834x_DR_USB_SUPPORT
+ ppc_sys_device_remove(MPC83xx_USB2_MPH);
+ pdata = (struct fsl_usb2_platform_data *) ppc_sys_get_pdata(MPC83xx_USB2_DR);
+
+ if (pdata) {
+ pdata->phy_mode = FSL_USB2_PHY_ULPI;
+ pdata->operating_mode = FSL_USB2_DR_HOST;
+ pdata->port_enables = FSL_USB2_PORT0_ENABLED;
+ }
+
+#elif defined(CONFIG_834x_MPH_USB_SUPPORT)
+ ppc_sys_device_remove(MPC83xx_USB2_DR);
+ pdata = (struct fsl_usb2_platform_data *) ppc_sys_get_pdata(MPC83xx_USB2_MPH);
+
+ if (pdata) {
+ pdata->phy_mode = FSL_USB2_PHY_ULPI;
+ pdata->operating_mode = FSL_USB2_MPH_HOST;
+ pdata->port_enables = FSL_USB2_PORT0_ENABLED;
+ }
+
+#endif
+ mpc834x_usb_pin_cfg(pdata);
+ mpc834x_board_init();
+ mpc834x_usb_clk_cfg();
+ return;
+}
+#endif /* CONFIG_834x_USB_SUPPORT */
+
/* ************************************************************************
*
* Setup the architecture
@@ -144,6 +240,10 @@ mpc834x_sys_setup_arch(void)
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
+#ifdef CONFIG_834x_USB_SUPPORT
+ mpc834x_usb_init();
+#endif
+
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h
index 2e514d3..fab3762 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.h
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.h
@@ -27,6 +27,9 @@
#define BCSR_PHYS_ADDR ((uint)0xf8000000)
#define BCSR_SIZE ((uint)(128 * 1024))
+#define BCSR5_OFF 0x05
+#define BCSR5_INT_USB 0x02
+
#define BCSR_MISC_REG2_OFF 0x07
#define BCSR_MISC_REG2_PORESET 0x01
diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c
index f9b95de..916926c 100644
--- a/arch/ppc/syslib/mpc83xx_devices.c
+++ b/arch/ppc/syslib/mpc83xx_devices.c
@@ -23,6 +23,8 @@
#include <asm/ppc_sys.h>
#include <asm/machdep.h>
+static u64 mpc83xx_dma_mask = 0xffffffffULL;
+
/* We use offsets for IORESOURCE_MEM since we do not know at compile time
* what IMMRBAR is, will get fixed up by mach_mpc83xx_fixup
*/
@@ -50,6 +52,14 @@ static struct fsl_i2c_platform_data mpc8
.device_flags = FSL_I2C_DEV_SEPARATE_DFSRR,
};
+/* Placeholder to be filled in by board code */
+static struct fsl_usb2_platform_data mpc83xx_fsl_dr_pdata = {
+};
+
+/* Placeholder to be filled in by board code */
+static struct fsl_usb2_platform_data mpc83xx_fsl_mph_pdata = {
+};
+
static struct plat_serial8250_port serial_platform_data[] = {
[0] = {
.mapbase = 0x4500,
@@ -190,7 +200,10 @@ struct platform_device ppc_sys_platform_
[MPC83xx_USB2_DR] = {
.name = "fsl-usb2-dr",
.id = 1,
+ .dev.platform_data = &mpc83xx_fsl_dr_pdata,
.num_resources = 2,
+ .dev.dma_mask = &mpc83xx_dma_mask,
+ .dev.coherent_dma_mask = 0xffffffffULL,
.resource = (struct resource[]) {
{
.start = 0x23000,
@@ -208,6 +221,9 @@ struct platform_device ppc_sys_platform_
.name = "fsl-usb2-mph",
.id = 1,
.num_resources = 2,
+ .dev.platform_data = &mpc83xx_fsl_mph_pdata,
+ .dev.dma_mask = &mpc83xx_dma_mask,
+ .dev.coherent_dma_mask = 0xffffffffULL,
.resource = (struct resource[]) {
{
.start = 0x22000,
diff --git a/include/asm-ppc/mpc83xx.h b/include/asm-ppc/mpc83xx.h
index 7cdf60f..cd2baf7 100644
--- a/include/asm-ppc/mpc83xx.h
+++ b/include/asm-ppc/mpc83xx.h
@@ -95,6 +95,23 @@ extern unsigned char __res[];
#define MPC83xx_CCSRBAR_SIZE (1024*1024)
+#define MPC83XX_SCCR_OFFS 0xA08
+#define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000
+#define MPC83XX_SCCR_USB_MPHCM_01 0x00400000
+#define MPC83XX_SCCR_USB_MPHCM_10 0x00800000
+#define MPC83XX_SCCR_USB_DRCM_11 0x00300000
+#define MPC83XX_SCCR_USB_DRCM_01 0x00100000
+#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
+
+/* system i/o configuration register low */
+#define MPC83XX_SICRL_OFFS 0x114
+#define MPC83XX_SICRL_USB0 0x40000000
+#define MPC83XX_SICRL_USB1 0x20000000
+
+/* system i/o configuration register high */
+#define MPC83XX_SICRH_OFFS 0x118
+#define MPC83XX_SICRH_USB_UTMI 0x00020000
+
/* Let modules/drivers get at immrbar (physical) */
extern phys_addr_t immrbar;
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] Add support for Freescale 83xx Host Mode USB
2006-01-18 18:54 Randy Vinson
@ 2006-01-19 0:18 ` Kumar Gala
0 siblings, 0 replies; 3+ messages in thread
From: Kumar Gala @ 2006-01-19 0:18 UTC (permalink / raw)
To: Randy Vinson; +Cc: linuxppc-dev
Thanks for the patch. I'm going to hold off on asking Paul to pull
this into powerpc.git and will work on an arch/powerpc version of
this. However, its good that the patch is on the list for anyone who
wants to use it with and older kernel.
- kumar
On Jan 18, 2006, at 12:54 PM, Randy Vinson wrote:
> Greetings,
> I've attached a patch (based on 2.6.16-rc1) which adds Host mode
> support for the Dual-Role(DR) and Multi-Port-Host (MPH) USB
> controllers
> found in the Freescale 8349. Note that this patch only provides the
> platform-specific code that sets up the external hardware and pin
> configuration. The actual DR and MPH controller driver is being posted
> on the linux-usb-devel mailing list.
>
> Using a Freescale 8349CDS reference board, the DR controller was
> successfully tested using a USB 2.0 high speed FLASH drive, a USB 1.1
> full speed 4-port hub and a Siemens SpeedStream USB to Ethernet
> adapter.
> The MPH controller has been successfully tested with a USB 2.0 high
> speed FLASH drive. Attempts to run USB 1.1 devices with the MPH
> controller have proven unsuccessful.
>
>
> Randy Vinson
> MontaVista Software
>
>
> Adding platform support for the 834x Host Mode USB controller.
>
> This patch provides the platform-specific hardware setup required
> by the
> 83xx Host Mode USB controller on the Freescale 8349CDS reference
> system.
>
> Signed-off-by: Randy Vinson <rvinson@mvista.com>
>
> ---
> commit 30b1d2d35237f0367aeceb1bc9f62c9fdc46dbff
> tree 64af0c1897f30bb1adb72ecbb6f4c4d0ef619639
> parent 2581e186c343cd26802279bd80e420307037fbc6
> author Randy Vinson <rvinson@linuxbox.(none)> Tue, 17 Jan 2006
> 16:32:23 -0700
> committer Randy Vinson <rvinson@linuxbox.(none)> Tue, 17 Jan 2006
> 16:32:23 -0700
>
> arch/ppc/Kconfig | 2 +
> arch/ppc/platforms/83xx/Kconfig | 28 +++++++++
> arch/ppc/platforms/83xx/mpc834x_sys.c | 100 ++++++++++++++++++++++
> +++++++++++
> arch/ppc/platforms/83xx/mpc834x_sys.h | 3 +
> arch/ppc/syslib/mpc83xx_devices.c | 16 +++++
> include/asm-ppc/mpc83xx.h | 17 ++++++
> 6 files changed, 166 insertions(+), 0 deletions(-)
>
> diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
> index 11899f0..b33b0eb 100644
> --- a/arch/ppc/Kconfig
> +++ b/arch/ppc/Kconfig
> @@ -681,6 +681,8 @@ config EV64360
> platform.
> endchoice
>
> +source arch/ppc/platforms/83xx/Kconfig
> +
> config PQ2ADS
> bool
> depends on ADS8272
> diff --git a/arch/ppc/platforms/83xx/Kconfig b/arch/ppc/platforms/
> 83xx/Kconfig
> new file mode 100644
> index 0000000..90bc67a
> --- /dev/null
> +++ b/arch/ppc/platforms/83xx/Kconfig
> @@ -0,0 +1,28 @@
> +config 834x_USB_SUPPORT
> + bool "834x USB Support"
> + depends on MPC834x_SYS
> + default y
> + ---help---
> + Enables support for the USB controllers on the MPC834x chip.
> The 834x
> + reference board is wired for only one USB port. That port may be
> + used by either the MPH or DR USB controller.
> + Requires USB Host EHCI support.
> + If unsure, say Y.
> +choice
> + prompt "834x USB Controller Selection"
> + depends on 834x_USB_SUPPORT
> + default 834x_DR_USB_SUPPORT
> +
> +config 834x_DR_USB_SUPPORT
> + bool "DR Controller"
> + select USB_EHCI_ROOT_HUB_TT
> + ---help---
> + Select if using the Dual-Role (DR) USB controller.
> +
> +config 834x_MPH_USB_SUPPORT
> + bool "MPH Controller"
> + ---help---
> + Select if using the Multi-Port-Host (MPH) USB controller.
> +
> +endchoice
> +
> diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/
> platforms/83xx/mpc834x_sys.c
> index 012e1e6..6f23909 100644
> --- a/arch/ppc/platforms/83xx/mpc834x_sys.c
> +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c
> @@ -11,6 +11,9 @@
> * under the terms of the GNU General Public License as
> published by the
> * Free Software Foundation; either version 2 of the License, or
> (at your
> * option) any later version.
> + *
> + * USB setup added by Randy Vinson <rvinson@mvista.com> based on
> code from
> + * Hunter Wu.
> */
>
> #include <linux/config.h>
> @@ -93,6 +96,99 @@ mpc83xx_exclude_device(u_char bus, u_cha
> }
> #endif /* CONFIG_PCI */
>
> +/*
> + * Configure the on-chip USB controller. The MPC834xCDS only
> supports the
> + * second USB interface (port 1). This code sets up the hardware
> and then
> + * lets the platform driver take over device setup.
> + */
> +
> +#ifdef CONFIG_834x_USB_SUPPORT
> +void mpc834x_board_init(void)
> +{
> + unsigned char __iomem *bcsr;
> + volatile unsigned char *bcsr5_p;
> +
> + /*
> + * if SYS board is plug into PIB board,
> + * force to use the PHY on SYS board
> + * */
> + bcsr = ioremap(BCSR_PHYS_ADDR, BCSR_SIZE);
> + bcsr5_p = bcsr + BCSR5_OFF;
> + if ( (*bcsr5_p & BCSR5_INT_USB) == 0 )
> + *bcsr5_p = (*bcsr5_p | BCSR5_INT_USB);
> + iounmap(bcsr);
> +}
> +
> +void mpc834x_usb_clk_cfg(void)
> +{
> + unsigned long sccr;
> + volatile unsigned long *p;
> +
> + p = (volatile unsigned long *)(VIRT_IMMRBAR +
> MPC83XX_SCCR_OFFS); /* SCCR */
> + sccr = *p;
> +
> + sccr |= MPC83XX_SCCR_USB_MPHCM_11 | MPC83XX_SCCR_USB_DRCM_11;
> +
> + *p = sccr;
> +}
> +
> +static void mpc834x_usb_pin_cfg(struct fsl_usb2_platform_data *pdata)
> +{
> + unsigned long sicrl;
> + volatile unsigned long *p;
> +
> + p = (volatile unsigned long *)(VIRT_IMMRBAR +
> MPC83XX_SICRL_OFFS); /* SCCR */
> + sicrl = *p;
> +
> + /* set both ports to MPH mode */
> + sicrl &= ~(MPC83XX_SICRL_USB0 | MPC83XX_SICRL_USB1);
> +
> + if (pdata->operating_mode == FSL_USB2_DR_HOST) {
> + if (pdata->phy_mode == FSL_USB2_PHY_UTMI_WIDE) {
> + /* UTMI WIDE combines both ports into a single 16-bit port */
> + sicrl |= MPC83XX_SICRL_USB0 | MPC83XX_SICRL_USB1;
> + }
> + else {
> + if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
> + sicrl |= MPC83XX_SICRL_USB0;
> + }
> + }
> + *p = sicrl;
> +}
> +
> +static void __init
> +mpc834x_usb_init(void)
> +{
> + struct fsl_usb2_platform_data *pdata;
> +
> +#ifdef CONFIG_834x_DR_USB_SUPPORT
> + ppc_sys_device_remove(MPC83xx_USB2_MPH);
> + pdata = (struct fsl_usb2_platform_data *) ppc_sys_get_pdata
> (MPC83xx_USB2_DR);
> +
> + if (pdata) {
> + pdata->phy_mode = FSL_USB2_PHY_ULPI;
> + pdata->operating_mode = FSL_USB2_DR_HOST;
> + pdata->port_enables = FSL_USB2_PORT0_ENABLED;
> + }
> +
> +#elif defined(CONFIG_834x_MPH_USB_SUPPORT)
> + ppc_sys_device_remove(MPC83xx_USB2_DR);
> + pdata = (struct fsl_usb2_platform_data *) ppc_sys_get_pdata
> (MPC83xx_USB2_MPH);
> +
> + if (pdata) {
> + pdata->phy_mode = FSL_USB2_PHY_ULPI;
> + pdata->operating_mode = FSL_USB2_MPH_HOST;
> + pdata->port_enables = FSL_USB2_PORT0_ENABLED;
> + }
> +
> +#endif
> + mpc834x_usb_pin_cfg(pdata);
> + mpc834x_board_init();
> + mpc834x_usb_clk_cfg();
> + return;
> +}
> +#endif /* CONFIG_834x_USB_SUPPORT */
> +
> /*
> **********************************************************************
> **
> *
> * Setup the architecture
> @@ -144,6 +240,10 @@ mpc834x_sys_setup_arch(void)
> memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
> }
>
> +#ifdef CONFIG_834x_USB_SUPPORT
> + mpc834x_usb_init();
> +#endif
> +
> #ifdef CONFIG_BLK_DEV_INITRD
> if (initrd_start)
> ROOT_DEV = Root_RAM0;
> diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/
> platforms/83xx/mpc834x_sys.h
> index 2e514d3..fab3762 100644
> --- a/arch/ppc/platforms/83xx/mpc834x_sys.h
> +++ b/arch/ppc/platforms/83xx/mpc834x_sys.h
> @@ -27,6 +27,9 @@
> #define BCSR_PHYS_ADDR ((uint)0xf8000000)
> #define BCSR_SIZE ((uint)(128 * 1024))
>
> +#define BCSR5_OFF 0x05
> +#define BCSR5_INT_USB 0x02
> +
> #define BCSR_MISC_REG2_OFF 0x07
> #define BCSR_MISC_REG2_PORESET 0x01
>
> diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/
> mpc83xx_devices.c
> index f9b95de..916926c 100644
> --- a/arch/ppc/syslib/mpc83xx_devices.c
> +++ b/arch/ppc/syslib/mpc83xx_devices.c
> @@ -23,6 +23,8 @@
> #include <asm/ppc_sys.h>
> #include <asm/machdep.h>
>
> +static u64 mpc83xx_dma_mask = 0xffffffffULL;
> +
> /* We use offsets for IORESOURCE_MEM since we do not know at
> compile time
> * what IMMRBAR is, will get fixed up by mach_mpc83xx_fixup
> */
> @@ -50,6 +52,14 @@ static struct fsl_i2c_platform_data mpc8
> .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR,
> };
>
> +/* Placeholder to be filled in by board code */
> +static struct fsl_usb2_platform_data mpc83xx_fsl_dr_pdata = {
> +};
> +
> +/* Placeholder to be filled in by board code */
> +static struct fsl_usb2_platform_data mpc83xx_fsl_mph_pdata = {
> +};
> +
> static struct plat_serial8250_port serial_platform_data[] = {
> [0] = {
> .mapbase = 0x4500,
> @@ -190,7 +200,10 @@ struct platform_device ppc_sys_platform_
> [MPC83xx_USB2_DR] = {
> .name = "fsl-usb2-dr",
> .id = 1,
> + .dev.platform_data = &mpc83xx_fsl_dr_pdata,
> .num_resources = 2,
> + .dev.dma_mask = &mpc83xx_dma_mask,
> + .dev.coherent_dma_mask = 0xffffffffULL,
> .resource = (struct resource[]) {
> {
> .start = 0x23000,
> @@ -208,6 +221,9 @@ struct platform_device ppc_sys_platform_
> .name = "fsl-usb2-mph",
> .id = 1,
> .num_resources = 2,
> + .dev.platform_data = &mpc83xx_fsl_mph_pdata,
> + .dev.dma_mask = &mpc83xx_dma_mask,
> + .dev.coherent_dma_mask = 0xffffffffULL,
> .resource = (struct resource[]) {
> {
> .start = 0x22000,
> diff --git a/include/asm-ppc/mpc83xx.h b/include/asm-ppc/mpc83xx.h
> index 7cdf60f..cd2baf7 100644
> --- a/include/asm-ppc/mpc83xx.h
> +++ b/include/asm-ppc/mpc83xx.h
> @@ -95,6 +95,23 @@ extern unsigned char __res[];
>
> #define MPC83xx_CCSRBAR_SIZE (1024*1024)
>
> +#define MPC83XX_SCCR_OFFS 0xA08
> +#define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000
> +#define MPC83XX_SCCR_USB_MPHCM_01 0x00400000
> +#define MPC83XX_SCCR_USB_MPHCM_10 0x00800000
> +#define MPC83XX_SCCR_USB_DRCM_11 0x00300000
> +#define MPC83XX_SCCR_USB_DRCM_01 0x00100000
> +#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
> +
> +/* system i/o configuration register low */
> +#define MPC83XX_SICRL_OFFS 0x114
> +#define MPC83XX_SICRL_USB0 0x40000000
> +#define MPC83XX_SICRL_USB1 0x20000000
> +
> +/* system i/o configuration register high */
> +#define MPC83XX_SICRH_OFFS 0x118
> +#define MPC83XX_SICRH_USB_UTMI 0x00020000
> +
> /* Let modules/drivers get at immrbar (physical) */
> extern phys_addr_t immrbar;
>
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] Add support for Freescale 83xx Host Mode USB
@ 2006-01-20 18:44 Randy Vinson
0 siblings, 0 replies; 3+ messages in thread
From: Randy Vinson @ 2006-01-20 18:44 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 1018 bytes --]
Greetings,
The following patch was supposed to have been sent to
linuxppc-embedded, but ended up on linuxppc-dev (address auto-completion
goof). So... Here it is as promised.
Greetings,
I've attached a patch (based on 2.6.16-rc1) which adds Host mode
support for the Dual-Role(DR) and Multi-Port-Host (MPH) USB controllers
found in the Freescale 8349. Note that this patch only provides the
platform-specific code that sets up the external hardware and pin
configuration. The actual DR and MPH controller driver is being posted
on the linux-usb-devel mailing list.
Using a Freescale 8349CDS reference board, the DR controller was
successfully tested using a USB 2.0 high speed FLASH drive, a USB 1.1
full speed 4-port hub and a Siemens SpeedStream USB to Ethernet adapter.
The MPH controller has been successfully tested with a USB 2.0 high
speed FLASH drive. Attempts to run USB 1.1 devices with the MPH
controller have proven unsuccessful.
Randy Vinson
MontaVista Software
[-- Attachment #2: 8349_usb_platform.patch --]
[-- Type: text/plain, Size: 8578 bytes --]
Adding platform support for the 834x Host Mode USB controller.
This patch provides the platform-specific hardware setup required by the
83xx Host Mode USB controller on the Freescale 8349CDS reference system.
Signed-off-by: Randy Vinson <rvinson@mvista.com>
---
commit 30b1d2d35237f0367aeceb1bc9f62c9fdc46dbff
tree 64af0c1897f30bb1adb72ecbb6f4c4d0ef619639
parent 2581e186c343cd26802279bd80e420307037fbc6
author Randy Vinson <rvinson@linuxbox.(none)> Tue, 17 Jan 2006 16:32:23 -0700
committer Randy Vinson <rvinson@linuxbox.(none)> Tue, 17 Jan 2006 16:32:23 -0700
arch/ppc/Kconfig | 2 +
arch/ppc/platforms/83xx/Kconfig | 28 +++++++++
arch/ppc/platforms/83xx/mpc834x_sys.c | 100 +++++++++++++++++++++++++++++++++
arch/ppc/platforms/83xx/mpc834x_sys.h | 3 +
arch/ppc/syslib/mpc83xx_devices.c | 16 +++++
include/asm-ppc/mpc83xx.h | 17 ++++++
6 files changed, 166 insertions(+), 0 deletions(-)
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 11899f0..b33b0eb 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -681,6 +681,8 @@ config EV64360
platform.
endchoice
+source arch/ppc/platforms/83xx/Kconfig
+
config PQ2ADS
bool
depends on ADS8272
diff --git a/arch/ppc/platforms/83xx/Kconfig b/arch/ppc/platforms/83xx/Kconfig
new file mode 100644
index 0000000..90bc67a
--- /dev/null
+++ b/arch/ppc/platforms/83xx/Kconfig
@@ -0,0 +1,28 @@
+config 834x_USB_SUPPORT
+ bool "834x USB Support"
+ depends on MPC834x_SYS
+ default y
+ ---help---
+ Enables support for the USB controllers on the MPC834x chip. The 834x
+ reference board is wired for only one USB port. That port may be
+ used by either the MPH or DR USB controller.
+ Requires USB Host EHCI support.
+ If unsure, say Y.
+choice
+ prompt "834x USB Controller Selection"
+ depends on 834x_USB_SUPPORT
+ default 834x_DR_USB_SUPPORT
+
+config 834x_DR_USB_SUPPORT
+ bool "DR Controller"
+ select USB_EHCI_ROOT_HUB_TT
+ ---help---
+ Select if using the Dual-Role (DR) USB controller.
+
+config 834x_MPH_USB_SUPPORT
+ bool "MPH Controller"
+ ---help---
+ Select if using the Multi-Port-Host (MPH) USB controller.
+
+endchoice
+
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c
index 012e1e6..6f23909 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.c
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.c
@@ -11,6 +11,9 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
+ * USB setup added by Randy Vinson <rvinson@mvista.com> based on code from
+ * Hunter Wu.
*/
#include <linux/config.h>
@@ -93,6 +96,99 @@ mpc83xx_exclude_device(u_char bus, u_cha
}
#endif /* CONFIG_PCI */
+/*
+ * Configure the on-chip USB controller. The MPC834xCDS only supports the
+ * second USB interface (port 1). This code sets up the hardware and then
+ * lets the platform driver take over device setup.
+ */
+
+#ifdef CONFIG_834x_USB_SUPPORT
+void mpc834x_board_init(void)
+{
+ unsigned char __iomem *bcsr;
+ volatile unsigned char *bcsr5_p;
+
+ /*
+ * if SYS board is plug into PIB board,
+ * force to use the PHY on SYS board
+ * */
+ bcsr = ioremap(BCSR_PHYS_ADDR, BCSR_SIZE);
+ bcsr5_p = bcsr + BCSR5_OFF;
+ if ( (*bcsr5_p & BCSR5_INT_USB) == 0 )
+ *bcsr5_p = (*bcsr5_p | BCSR5_INT_USB);
+ iounmap(bcsr);
+}
+
+void mpc834x_usb_clk_cfg(void)
+{
+ unsigned long sccr;
+ volatile unsigned long *p;
+
+ p = (volatile unsigned long *)(VIRT_IMMRBAR + MPC83XX_SCCR_OFFS); /* SCCR */
+ sccr = *p;
+
+ sccr |= MPC83XX_SCCR_USB_MPHCM_11 | MPC83XX_SCCR_USB_DRCM_11;
+
+ *p = sccr;
+}
+
+static void mpc834x_usb_pin_cfg(struct fsl_usb2_platform_data *pdata)
+{
+ unsigned long sicrl;
+ volatile unsigned long *p;
+
+ p = (volatile unsigned long *)(VIRT_IMMRBAR + MPC83XX_SICRL_OFFS); /* SCCR */
+ sicrl = *p;
+
+ /* set both ports to MPH mode */
+ sicrl &= ~(MPC83XX_SICRL_USB0 | MPC83XX_SICRL_USB1);
+
+ if (pdata->operating_mode == FSL_USB2_DR_HOST) {
+ if (pdata->phy_mode == FSL_USB2_PHY_UTMI_WIDE) {
+ /* UTMI WIDE combines both ports into a single 16-bit port */
+ sicrl |= MPC83XX_SICRL_USB0 | MPC83XX_SICRL_USB1;
+ }
+ else {
+ if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
+ sicrl |= MPC83XX_SICRL_USB0;
+ }
+ }
+ *p = sicrl;
+}
+
+static void __init
+mpc834x_usb_init(void)
+{
+ struct fsl_usb2_platform_data *pdata;
+
+#ifdef CONFIG_834x_DR_USB_SUPPORT
+ ppc_sys_device_remove(MPC83xx_USB2_MPH);
+ pdata = (struct fsl_usb2_platform_data *) ppc_sys_get_pdata(MPC83xx_USB2_DR);
+
+ if (pdata) {
+ pdata->phy_mode = FSL_USB2_PHY_ULPI;
+ pdata->operating_mode = FSL_USB2_DR_HOST;
+ pdata->port_enables = FSL_USB2_PORT0_ENABLED;
+ }
+
+#elif defined(CONFIG_834x_MPH_USB_SUPPORT)
+ ppc_sys_device_remove(MPC83xx_USB2_DR);
+ pdata = (struct fsl_usb2_platform_data *) ppc_sys_get_pdata(MPC83xx_USB2_MPH);
+
+ if (pdata) {
+ pdata->phy_mode = FSL_USB2_PHY_ULPI;
+ pdata->operating_mode = FSL_USB2_MPH_HOST;
+ pdata->port_enables = FSL_USB2_PORT0_ENABLED;
+ }
+
+#endif
+ mpc834x_usb_pin_cfg(pdata);
+ mpc834x_board_init();
+ mpc834x_usb_clk_cfg();
+ return;
+}
+#endif /* CONFIG_834x_USB_SUPPORT */
+
/* ************************************************************************
*
* Setup the architecture
@@ -144,6 +240,10 @@ mpc834x_sys_setup_arch(void)
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
+#ifdef CONFIG_834x_USB_SUPPORT
+ mpc834x_usb_init();
+#endif
+
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h
index 2e514d3..fab3762 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.h
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.h
@@ -27,6 +27,9 @@
#define BCSR_PHYS_ADDR ((uint)0xf8000000)
#define BCSR_SIZE ((uint)(128 * 1024))
+#define BCSR5_OFF 0x05
+#define BCSR5_INT_USB 0x02
+
#define BCSR_MISC_REG2_OFF 0x07
#define BCSR_MISC_REG2_PORESET 0x01
diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c
index f9b95de..916926c 100644
--- a/arch/ppc/syslib/mpc83xx_devices.c
+++ b/arch/ppc/syslib/mpc83xx_devices.c
@@ -23,6 +23,8 @@
#include <asm/ppc_sys.h>
#include <asm/machdep.h>
+static u64 mpc83xx_dma_mask = 0xffffffffULL;
+
/* We use offsets for IORESOURCE_MEM since we do not know at compile time
* what IMMRBAR is, will get fixed up by mach_mpc83xx_fixup
*/
@@ -50,6 +52,14 @@ static struct fsl_i2c_platform_data mpc8
.device_flags = FSL_I2C_DEV_SEPARATE_DFSRR,
};
+/* Placeholder to be filled in by board code */
+static struct fsl_usb2_platform_data mpc83xx_fsl_dr_pdata = {
+};
+
+/* Placeholder to be filled in by board code */
+static struct fsl_usb2_platform_data mpc83xx_fsl_mph_pdata = {
+};
+
static struct plat_serial8250_port serial_platform_data[] = {
[0] = {
.mapbase = 0x4500,
@@ -190,7 +200,10 @@ struct platform_device ppc_sys_platform_
[MPC83xx_USB2_DR] = {
.name = "fsl-usb2-dr",
.id = 1,
+ .dev.platform_data = &mpc83xx_fsl_dr_pdata,
.num_resources = 2,
+ .dev.dma_mask = &mpc83xx_dma_mask,
+ .dev.coherent_dma_mask = 0xffffffffULL,
.resource = (struct resource[]) {
{
.start = 0x23000,
@@ -208,6 +221,9 @@ struct platform_device ppc_sys_platform_
.name = "fsl-usb2-mph",
.id = 1,
.num_resources = 2,
+ .dev.platform_data = &mpc83xx_fsl_mph_pdata,
+ .dev.dma_mask = &mpc83xx_dma_mask,
+ .dev.coherent_dma_mask = 0xffffffffULL,
.resource = (struct resource[]) {
{
.start = 0x22000,
diff --git a/include/asm-ppc/mpc83xx.h b/include/asm-ppc/mpc83xx.h
index 7cdf60f..cd2baf7 100644
--- a/include/asm-ppc/mpc83xx.h
+++ b/include/asm-ppc/mpc83xx.h
@@ -95,6 +95,23 @@ extern unsigned char __res[];
#define MPC83xx_CCSRBAR_SIZE (1024*1024)
+#define MPC83XX_SCCR_OFFS 0xA08
+#define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000
+#define MPC83XX_SCCR_USB_MPHCM_01 0x00400000
+#define MPC83XX_SCCR_USB_MPHCM_10 0x00800000
+#define MPC83XX_SCCR_USB_DRCM_11 0x00300000
+#define MPC83XX_SCCR_USB_DRCM_01 0x00100000
+#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
+
+/* system i/o configuration register low */
+#define MPC83XX_SICRL_OFFS 0x114
+#define MPC83XX_SICRL_USB0 0x40000000
+#define MPC83XX_SICRL_USB1 0x20000000
+
+/* system i/o configuration register high */
+#define MPC83XX_SICRH_OFFS 0x118
+#define MPC83XX_SICRH_USB_UTMI 0x00020000
+
/* Let modules/drivers get at immrbar (physical) */
extern phys_addr_t immrbar;
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-01-20 18:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-01-20 18:44 [PATCH] Add support for Freescale 83xx Host Mode USB Randy Vinson
-- strict thread matches above, loose matches on Subject: below --
2006-01-18 18:54 Randy Vinson
2006-01-19 0:18 ` Kumar Gala
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).