RE: USB flashdrive on Motorola MPC5200 (IceCube) board, linux ke rnel 2.4.20

* RE: USB flashdrive on Motorola MPC5200 (IceCube) board, linux  ke rnel 2.4.20
@ 2006-06-14 15:36 Furxhi, Orges
  2006-06-14 15:49 ` USB flashdrive on Motorola MPC5200 (IceCube) board, linux kernel 2.4.20 Igor Luri
  2006-06-14 20:07 ` USB flashdrive on Motorola MPC5200 (IceCube) board, linux ke rnel 2.4.20 Wolfgang Denk
  0 siblings, 2 replies; 6+ messages in thread
From: Furxhi, Orges @ 2006-06-14 15:36 UTC (permalink / raw)
  To: Igor Luri, Furxhi, Orges; +Cc: linuxppc-embedded

I downloaded the kernel you recommended and now I am trying to build a UBoot
image that I can load unto flash.
I use the following commands: 
$ make mrproper
$ make menuconfig
  (select arch/ppc/configs/icecube_5200_defconfig file, exit and save)
$ make uImage

I can not find the UBoot image (/arch/ppc/boot/images/)
I get the following error message after I execute $ make uImage:
...
/bin/sh: line 1: scripts/mkdep: Invalid argument
make: *** [dep-files] Error 126

Is there another sequence of make commands that I need to follow to create a
UBoot image?

Thanks,

Orges

-----Original Message-----
From: Igor Luri [mailto:iluri@fagorautomation.es] 
Sent: Wednesday, June 14, 2006 8:57 AM
To: Furxhi, Orges
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: USB flashdrive on Motorola MPC5200 (IceCube) board, linux
kernel 2.4.20

It is posible that your kernel uses old USB code. We also have an 
Icecube board, the same board a yours, with linux 2.4.25 version from 
DENX and USB works well.

You can try with this kernel:

ftp://ftp.denx.de/pub/linux/linuxppc_2_4_devel-2006-04-06-1735.tar.bz2

Hope this helps.

Furxhi, Orges wrote:

>Thank you for your help.
>
>I am using a Memorex travel drive 2.0 (512 MB), and I also have a
>Intelligent Stick 2.0 from GE. 
>When I plug in the Memorex stick the following appears on the terminal :
>	# hub.c: new USB device builtin-1, assigned address 2
>	usb.c: USB device not accepting new address=2 (error=-110)
>	hub.c: new USB device builtin-1, assigned address 3
>	usb.c: USB device not accepting new address=3 (error=-110)
>
>When I plug in the GE stick nothing shows on the terminal, but when I
remove
>it the following message comes up: 
>	# hub.c: connect-debounce failed, port 1 disabled
>
>Both the USB flash drives work on my Dell PC with RedHat 9.0 (2.4.20
>kernel).
>
>Orges
>  
>
>
>-----Original Message-----
>From: Igor Luri [mailto:iluri@fagorautomation.es] 
>Sent: Wednesday, June 14, 2006 3:07 AM
>To: Furxhi, Orges
>Cc: linuxppc-embedded@ozlabs.org
>Subject: Re: USB flashdrive on Motorola MPC5200 (IceCube) board, linux
>kernel 2.4.20
>
>What kind of USB flash drive are you using? Linux doesn't detect your 
>device.
>
>When you plug/unplug a USB device you have to get something like this:
>
>            hub.c: new USB device 0-1, assigned address 2
>            scsi0 : SCSI emulation for USB Mass Storage devices
>            Vendor: Model: USB DISK Pro Rev: 1.00
>            Type: Direct-Access ANSI SCSI revision: 02
>            Attached scsi removable disk sda at scsi0, channel 0, id 0,
>            lun 0
>            SCSI device sda: 240640 512-byte hdwr sectors (123 MB)
>            sda: Write Protect is off
>            sda: sda1
>
>            usb.c: USB disconnect on device 0-1 address 2
>
>
>Are you sure that this device is supported in your Linux configuration?
>
>
>
>Furxhi, Orges wrote:
>
>  
>
>>Hi all,
>>
>>I have been trying for days now to get my usb flashdrive to work on my 
>>Motorola MPC5200 (IceCube) board running on the 2.4.20 linux kernel. I 
>>have followed the instruction in this Flash Memory HOWTO article 
>>(http://www.tldp.org/HOWTO/Flash-Memory-HOWTO/index.html), but I have 
>>had no success.
>>
>>When I mount the usbfs filesystem (mount -t usbfs none /proc/bus/usb/) 
>>the following 3 items are created in the /proc/bus/usb/ directory:
>>
>>dr-xr-xr-x 1 root root 0 Jan 1 00:12 001
>>
>>-r--r--r-- 1 root root 0 Jan 1 00:12 devices
>>
>>-r--r--r-- 1 root root 0 Jan 1 00:12 drivers
>>
>># cat devices shows:
>>
>>T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
>>
>>B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
>>
>>D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
>>
>>P: Vendor=0000 ProdID=0000 Rev= 0.00
>>
>>S: Product=USB OHCI Root Hub
>>
>>S: SerialNumber=f0001000
>>
>>C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
>>
>>I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
>>
>>E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>>
>># cat drivers shows
>>
>>usbdevfs
>>
>>hub
>>
>>usb-storage
>>
>>In the this Flash Memory-HOWTO it is mentioned that the usb-storage-x 
>>directory will be created in the /proc/scsi/ directory, but I do not 
>>see it on my system. Also the contents of /proc/scsi/scsi are 
>>"Attached devices: none".
>>
>>Following are my boot up messages:
>>
>>U-Boot 1.1.4 (Mar 21 2006 - 15:07:57)
>>
>>CPU: MPC5200 v1.2 at 462 MHz
>>
>>Bus 132 MHz, IPB 66 MHz, PCI 33 MHz
>>
>>Board: Motorola MPC5200 (IceCube)
>>
>>I2C: 85 kHz, ready
>>
>>DRAM: 64 MB
>>
>>FLASH: 8 MB
>>
>>In: serial
>>
>>Out: serial
>>
>>Err: serial
>>
>>Net: FEC ETHERNET
>>
>>Type "run flash_nfs" to mount root filesystem over NFS
>>
>>Hit any key to stop autoboot: 0
>>
>>## Booting image at ff900000 ...
>>
>>Image Name: Linux-2.4.20_mvl31-lite5200
>>
>>Created: 2006-06-13 21:40:05 UTC
>>
>>Image Type: PowerPC Linux Kernel Image (gzip compressed)
>>
>>Data Size: 989480 Bytes = 966.3 kB
>>
>>Load Address: 00000000
>>
>>Entry Point: 00000000
>>
>>Verifying Checksum ... OK
>>
>>Uncompressing Kernel Image ... OK
>>
>>Memory BAT mapping: BAT2=64Mb, BAT3=0Mb, residual: 0Mb
>>
>>Linux version 2.4.20_mvl31-lite5200 (ofurxhi@mdc58503) (gcc version 
>>3.3.1 (Monta
>>
>>Vista 3.3.1-7.0.13.0500039 2005-01-12)) #11 Tue Jun 13 16:32:09 CDT 2006
>>
>>On node 0 totalpages: 16384
>>
>>zone(0): 16384 pages.
>>
>>zone(1): 0 pages.
>>
>>zone(2): 0 pages.
>>
>>Kernel command line: root=/dev/mtdblock2 rw rootfstype=jffs2 
>>ip=192.168.0.7:192.
>>
>>168.0.2:192.168.0.2:255.255.255.0:cpua::off
>>
>>frequencies: cpu=461995100, bus=131998608, ipb=65999304, pci=32999652
>>
>>Calibrating delay loop... 307.20 BogoMIPS
>>
>>Memory: 62460k available (1540k kernel code, 524k data, 240k init, 0k 
>>highmem)
>>
>>Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
>>
>>Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
>>
>>Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
>>
>>Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
>>
>>Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
>>
>>POSIX conformance testing by UNIFIX
>>
>>PCI: Probing PCI hardware
>>
>>PCI: Cannot allocate resource region 1 of device 00:00.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:01.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:02.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:03.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:04.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:05.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:06.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:07.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:08.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:09.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:0a.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:0b.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:0c.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:0d.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:0e.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:0f.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:10.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:11.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:12.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:13.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:14.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:15.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:16.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:17.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:18.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:19.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:1a.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:1b.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:1c.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:1d.0
>>
>>PCI: Cannot allocate resource region 1 of device 00:1e.0
>>
>>Linux NET4.0 for Linux 2.4
>>
>>Based upon Swansea University Computer Society NET3.039
>>
>>Initializing RT netlink socket
>>
>>LSP Revision 52
>>
>>ikconfig 0.5 with /proc/ikconfig
>>
>>Starting kswapd
>>
>>Disabling the Out Of Memory Killer
>>
>>Journalled Block Device driver loaded
>>
>>devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
>>
>>devfs: boot_options: 0x1
>>
>>JFFS version 1.0, (C) 1999, 2000 Axis Communications AB
>>
>>JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis 
>>Communications
>>
>>AB.
>>
>>pty: 256 Unix98 ptys configured
>>
>>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
>>
>>loop: loaded (max 8 devices)
>>
>>Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
>>
>>SCSI subsystem driver Revision: 1.00
>>
>>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
>>
>>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
>>
>>NO QRY response
>>
>>cfi_cmdset_0001: Erase suspend on write enabled
>>
>>Using buffer write method
>>
>>Icecube flash bank 0: Using static image partition definition
>>
>>Creating 3 MTD partitions on "Icecube Bank 0":
>>
>>0x00000000-0x00100000 : "u-boot"
>>
>>0x00100000-0x00200000 : "kernel"
>>
>>0x00200000-0x00800000 : "jffs2"
>>
>>usb.c: registered new driver usbdevfs
>>
>>usb.c: registered new driver hub
>>
>>usb-ohci.c: USB OHCI at membase 0xf0001000, IRQ 44
>>
>>usb.c: new USB bus registered, assigned bus number 1
>>
>>Product: USB OHCI Root Hub
>>
>>SerialNumber: f0001000
>>
>>hub.c: USB hub found
>>
>>hub.c: 2 ports detected
>>
>>Initializing USB Mass Storage driver...
>>
>>usb.c: registered new driver usb-storage
>>
>>USB Mass Storage support registered.
>>
>>eth0: Phy @ 0x0, type LXT971 (0x001378e2)
>>
>>NET4: Linux TCP/IP 1.0 for NET4.0
>>
>>IP Protocols: ICMP, UDP, TCP, IGMP
>>
>>IP: routing cache hash table of 512 buckets, 4Kbytes
>>
>>TCP: Hash tables configured (established 4096 bind 8192)
>>
>>eth0: config: auto-negotiation off, 100HDX, 10HDX.
>>
>>IP-Config: Complete:
>>
>>device=eth0, addr=192.168.0.7, mask=255.255.255.0, gw=192.168.0.2,
>>
>>host=cpua, domain=, nis-domain=(none),
>>
>>bootserver=192.168.0.2, rootserver=192.168.0.2, rootpath=
>>
>>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>>
>>Empty flash at 0x0000fffc ends at 0x00010000
>>
>>CLEANMARKER node found at 0x00010000, not first node in block (0x00000000)
>>
>>Empty flash at 0x0002fffc ends at 0x00030000
>>
>>CLEANMARKER node found at 0x00030000, not first node in block (0x00020000)
>>
>>Empty flash at 0x0004fffc ends at 0x00050000
>>
>>CLEANMARKER node found at 0x00050000, not first node in block (0x00040000)
>>
>>Empty flash at 0x0006fffc ends at 0x00070000
>>
>>CLEANMARKER node found at 0x00070000, not first node in block (0x00060000)
>>
>>Empty flash at 0x0008fffc ends at 0x00090000
>>
>>CLEANMARKER node found at 0x00090000, not first node in block (0x00080000)
>>
>>Empty flash at 0x000afffc ends at 0x000b0000
>>
>>CLEANMARKER node found at 0x000b0000, not first node in block (0x000a0000)
>>
>>Empty flash at 0x000cfffc ends at 0x000d0000
>>
>>CLEANMARKER node found at 0x000d0000, not first node in block (0x000c0000)
>>
>>Empty flash at 0x000efffc ends at 0x000f0000
>>
>>CLEANMARKER node found at 0x000f0000, not first node in block (0x000e0000)
>>
>>Empty flash at 0x0010fffc ends at 0x00110000
>>
>>CLEANMARKER node found at 0x00110000, not first node in block (0x00100000)
>>
>>Empty flash at 0x0012fffc ends at 0x00130000
>>
>>CLEANMARKER node found at 0x00130000, not first node in block (0x00120000)
>>
>>Empty flash at 0x0014fffc ends at 0x00150000
>>
>>CLEANMARKER node found at 0x00150000, not first node in block (0x00140000)
>>
>>Empty flash at 0x0016fffc ends at 0x00170000
>>
>>CLEANMARKER node found at 0x00170000, not first node in block (0x00160000)
>>
>>Empty flash at 0x0018fffc ends at 0x00190000
>>
>>CLEANMARKER node found at 0x00190000, not first node in block (0x00180000)
>>
>>Empty flash at 0x001afffc ends at 0x001b0000
>>
>>CLEANMARKER node found at 0x001b0000, not first node in block (0x001a0000)
>>
>>Empty flash at 0x001cfffc ends at 0x001d0000
>>
>>CLEANMARKER node found at 0x001d0000, not first node in block (0x001c0000)
>>
>>Empty flash at 0x001efffc ends at 0x001f0000
>>
>>CLEANMARKER node found at 0x001f0000, not first node in block (0x001e0000)
>>
>>Empty flash at 0x0020fffc ends at 0x00210000
>>
>>CLEANMARKER node found at 0x00210000, not first node in block (0x00200000)
>>
>>Empty flash at 0x0022fffc ends at 0x00230000
>>
>>CLEANMARKER node found at 0x00230000, not first node in block (0x00220000)
>>
>>Empty flash at 0x0024fffc ends at 0x00250000
>>
>>CLEANMARKER node found at 0x00250000, not first node in block (0x00240000)
>>
>>Empty flash at 0x0026fffc ends at 0x00270000
>>
>>CLEANMARKER node found at 0x00270000, not first node in block (0x00260000)
>>
>>VFS: Mounted root (jffs2 filesystem).
>>
>>Mounted devfs on /dev
>>
>>Freeing unused kernel memory: 240k init
>>
>>serial console detected. Disabling virtual terminals.
>>
>>init started: BusyBox v0.60.3 (2004.01.09-22:53+0000) multi-call binary
>>
>>Initializing iocspi
>>
>>Warning: loading /lib/modules/iocspim.o will taint the kernel: no license
>>
>>See http://www.tux.org/lkml/#export-tainted for information about 
>>tainted modu
>>
>>les
>>
>>iocspi: release_20060418
>>
>>iocspi: major 254.
>>
>>Module iocspim loaded, with warnings
>>
>>Initializing canspi
>>
>>Warning: loading /lib/modules/canspim.o will taint the kernel: no license
>>
>>See http://www.tux.org/lkml/#export-tainted for information about 
>>tainted modu
>>
>>les
>>
>>canspi: init_module()
>>
>>canspi: init_module(): sema_init
>>
>>canspi: init_module(): register_chrdev
>>
>>canspi: major 253.
>>
>>canspi: micro_config()
>>
>>canspi: micro_config: PSC request_irq failed (0)
>>
>>canspi: micro_config psc=f0002400 cdm=f0000200 gpio=f0000b00 
>>portcfg=10051004
>>
>>Module canspim loaded, with warnings
>>
>>Initializing iocdrv
>>
>>Warning: loading /lib/modules/iocdrvm.o will taint the kernel: no license
>>
>>See http://www.tux.org/lkml/#export-tainted for information about 
>>tainted modu
>>
>>les
>>
>>iocdrv: release_20060502
>>
>>iocdrv: major 252.
>>
>>Module iocdrvm loaded, with warnings
>>
>>System initialized
>>
>>MontaVista(R) Linux(R) Professional Edition 3.1
>>
>>cpua login:
>>
>>Any help would be highly appreciated.
>>
>>Thank you,
>>
>>Orges Furxhi
>>
>>------------------------------------------------------------------------
>>
>>_______________________________________________
>>Linuxppc-embedded mailing list
>>Linuxppc-embedded@ozlabs.org
>>https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>>
>>    
>>

^ permalink raw reply	[flat|nested] 6+ messages in thread