request_irq in a module casues kernel crash

request_irq in a module casues kernel crash

[brijesh.chodavadiya]

please rewrite handler function with,

 void handler(int irq, void *dev_id, struct pt_regs * regs)
 {
	printk("Interrupt handler invoked for irq %d \n",irq);
	return IRQ_HANDLED;
 }



eInfochips Business Disclaimer:
This message may contain confidential, proprietary or legally Privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, Disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by eInfochips Limited and/or eInfochips Inc("eInfochips") unless sent with that express intent and with due authority of eInfochips. eInfochips has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email.

request_irq in a module casues kernel crash

[Subodh Nijsure]

I am trying to write a module where I am trying to register an interrupt
handler using request_irq() sample code for which appears below, when
I try to load this module, I am getting kernel panic. Anybody knows reason
why?
I have compiled the kernel with  CONFIG_MODULES=y CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

I am using  2.4.2-pre3 on a 860 platform.


void handler(int irq, void *dev_id, struct pt_regs * regs)
{
    printk("Interrupt handler invoked for irq %d \n",irq);
}

/* load the module */
int init_module(void)
{
    int result;
    result = request_irq (SIU_IRQ7, my_handler,SA_INTERRUPT,
		"cxeHandler",NULL);
    if ( result )
        printk("Interrupt not assigned");
    else
        printk("Interrupt  assigned");
    return 0;
}

/* remove the module */
void cleanup_module(void)
{
    return;
}

/Subodh Nijsure

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: request_irq in a module casues kernel crash

[Cort Dougan]

Try request_8xxirq, not request_irq.  The 8xx has its own name for
request_irq.

} I am trying to write a module where I am trying to register an interrupt
} handler using request_irq() sample code for which appears below, when
} I try to load this module, I am getting kernel panic. Anybody knows reason
} why?
} I have compiled the kernel with  CONFIG_MODULES=y CONFIG_MODVERSIONS=y
} CONFIG_KMOD=y
}
} I am using  2.4.2-pre3 on a 860 platform.
}
}
} void handler(int irq, void *dev_id, struct pt_regs * regs)
} {
}     printk("Interrupt handler invoked for irq %d \n",irq);
} }
}
} /* load the module */
} int init_module(void)
} {
}     int result;
}     result = request_irq (SIU_IRQ7, my_handler,SA_INTERRUPT,
} 		"cxeHandler",NULL);
}     if ( result )
}         printk("Interrupt not assigned");
}     else
}         printk("Interrupt  assigned");
}     return 0;
} }
}
} /* remove the module */
} void cleanup_module(void)
} {
}     return;
} }
}
} /Subodh Nijsure
}

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/