From: sudheer <urwithsudheer@gmail.com>
To: Ameet Patil <ammubhai@gmail.com>
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: SystemAce Driver.
Date: Fri, 11 Aug 2006 16:12:41 +0530 [thread overview]
Message-ID: <44DC5F21.8000906@gmail.com> (raw)
In-Reply-To: <44DC4F34.1070308@gmail.com>
Hi Ameet,
Firstly, thanks for the mail.
I am able to compile the linux-2.6.16 and got the ace support files with
the patch.
While compiling got some errors with xparameters, but am rectify them.
I need to wait for the hardware to test the source.
Thanks & Regards
Sudheer
Ameet Patil wrote:
> Hi Sudheer,
> Frank has already answered your questions. If you have any problems
> with the SysAce patch... do let me know. I have written a small
> tutorial here if it helps...
>
> http://linux.get2knowmore.com
>
>
> -Ameet
>
> sudheer wrote:
>> Hello Ameet Patil
>>
>> I am looking for linux kernel source 2.6.16 with system ace
>> controller support. I downloaded the linux-2.6.16 and linux-2.6.17-1
>> source from kernel.org but could not find any files related to system
>> ace controller ( No xilinx_sysace directory in drivers/block/) . I
>> have checked penguinppc.org also but could not get it.
>>
>> Can you please send to me the link where i could download the
>> linuxppc-2.6.16 source with system ace support.
>>
>> Thanks & Regards
>> Sudheer
>>
>> Ameet Patil wrote:
>>> Hi Raja,
>>> I have ported the Xilinx System ACE driver to 2.6 kernel. Find
>>> the latest one here:
>>> http://www.cs.york.ac.uk/rtslab/demos/amos/xupv2pro/patches/linuxppc-2.6.17.1-sysace-1.2.patch
>>>
>>>
>>> NOTE: this patch wouldn't work if you are using the TEMAC driver. In
>>> which case use the -after-TEMAC patch found in the patches folder
>>> above.
>>>
>>> Check the following discussions (threads) for more details:
>>> 1. "Xilinx SystemACE driver for 2.6"
>>> 2. "Xilinx BSP for linux 2.6"
>>> 3. "Kernel hangs after "Now booting the kernel"."
>>>
>>> cheers,
>>> -Ameet
>>>
>>> Raja Chidambaram wrote:
>>>
>>>> Hi all,
>>>> We are working on customized board with amcc 440SPe
>>>> processor & xilinx System Ace controller. The System
>>>> Ace controller is connected to compact flash driver.
>>>>
>>>> We use u-boot 1.2 as bootloader & linux kernel
>>>> 2.6.16-2.
>>>>
>>>> On the process the u-boot is able to detect compact
>>>> flash through Xilinx SystemAce controller & able to
>>>> load the kernel image into compact flash.But when the
>>>> linux boot's up it not able to detect the System Ace
>>>> controller or compact flash.
>>>>
>>>> Note:we need to have the root file system in compact
>>>> flash.
>>>>
>>>> Is their any drivers available for SystemAce
>>>> controller on linux 2.6,if their how to get it.please
>>>> help me in this
>>>> with regards
>>>> raja
>>>>
>>>>
>>>>
>>>> __________________________________________________
>>>> Do You Yahoo!?
>>>> Tired of spam? Yahoo! Mail has the best spam protection around
>>>> http://mail.yahoo.com _______________________________________________
>>>> Linuxppc-embedded mailing list
>>>> Linuxppc-embedded@ozlabs.org
>>>> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>>>>
>>>>
>>> _______________________________________________
>>> Linuxppc-embedded mailing list
>>> Linuxppc-embedded@ozlabs.org
>>> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>>>
>>>
>>
>
next prev parent reply other threads:[~2006-08-11 10:42 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-24 12:14 RE:SystemAce Driver Raja Chidambaram
2006-07-24 12:34 ` SystemAce Driver Ameet Patil
2006-08-09 15:06 ` sudheer
2006-08-09 20:09 ` Frank D Lombardo
2006-08-10 3:06 ` sudheer
2006-08-11 9:34 ` Ameet Patil
2006-08-11 10:42 ` sudheer [this message]
2006-08-22 15:07 ` sudheer
2006-08-30 14:12 ` could not access the address in linux-System ace driver sudheer
2006-09-07 9:05 ` SystemAce Driver sudheer
2006-09-08 15:46 ` Ameet Patil
2006-09-09 0:04 ` a sudheer
2006-07-24 12:36 ` Driver Ming Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44DC5F21.8000906@gmail.com \
--to=urwithsudheer@gmail.com \
--cc=ammubhai@gmail.com \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).