From: sudheer <urwithsudheer@gmail.com>
To: sudheer <urwithsudheer@gmail.com>
Cc: raja_chidambaram82@yahoo.com, linuxppc-embedded@ozlabs.org
Subject: Re: SystemAce Driver.
Date: Tue, 22 Aug 2006 20:37:46 +0530 [thread overview]
Message-ID: <44EB1DC2.5070307@gmail.com> (raw)
In-Reply-To: <44DC5F21.8000906@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4720 bytes --]
Hello Raja,
We too are working on customized board with amcc 440SPe processor &
xilinx System Ace controller. The System Ace controller is connected to
compact flash driver.
We use u-boot 1.1.2 as bootloader & linux kernel - 2.6.16-2.
System ace is connected to amcc440SPE processor via GPIO and External
Peripheral Bus Controller(EBC).
While booting the linux, it crashes when i am trying to
access(read/write) a system ace register.
In the u-boot though i have support, as of now i am not doing anything
with system ace as it not required now.
In u-boot/include/configs/custom_board.h, i could see
#define CFG_ACE_BASE 0xe0000000 /* Xilinx ACE controller
- Compact Flash */
So i have used this address in Linux driver to to ioremap to access
the ace registers. Though i could do ioremap, it crashes while booting
exactly when it is trying the access any ace register.
I doubt with the address i have used . But could not get any clue from
the docs given.
I want to know how to access the system ace registers and how to get
the address to ioremap. Please let me know if any details required and
also if i am missing any fundamentals.
Thanks & Regards
Sudheer
sudheer wrote:
> Hi Ameet,
>
> Firstly, thanks for the mail.
>
> I am able to compile the linux-2.6.16 and got the ace support files with
> the patch.
> While compiling got some errors with xparameters, but am rectify them.
>
> I need to wait for the hardware to test the source.
>
> Thanks & Regards
> Sudheer
>
>
> Ameet Patil wrote:
>
>> Hi Sudheer,
>> Frank has already answered your questions. If you have any problems
>> with the SysAce patch... do let me know. I have written a small
>> tutorial here if it helps...
>>
>> http://linux.get2knowmore.com
>>
>>
>> -Ameet
>>
>> sudheer wrote:
>>
>>> Hello Ameet Patil
>>>
>>> I am looking for linux kernel source 2.6.16 with system ace
>>> controller support. I downloaded the linux-2.6.16 and linux-2.6.17-1
>>> source from kernel.org but could not find any files related to system
>>> ace controller ( No xilinx_sysace directory in drivers/block/) . I
>>> have checked penguinppc.org also but could not get it.
>>>
>>> Can you please send to me the link where i could download the
>>> linuxppc-2.6.16 source with system ace support.
>>>
>>> Thanks & Regards
>>> Sudheer
>>>
>>> Ameet Patil wrote:
>>>
>>>> Hi Raja,
>>>> I have ported the Xilinx System ACE driver to 2.6 kernel. Find
>>>> the latest one here:
>>>> http://www.cs.york.ac.uk/rtslab/demos/amos/xupv2pro/patches/linuxppc-2.6.17.1-sysace-1.2.patch
>>>>
>>>>
>>>> NOTE: this patch wouldn't work if you are using the TEMAC driver. In
>>>> which case use the -after-TEMAC patch found in the patches folder
>>>> above.
>>>>
>>>> Check the following discussions (threads) for more details:
>>>> 1. "Xilinx SystemACE driver for 2.6"
>>>> 2. "Xilinx BSP for linux 2.6"
>>>> 3. "Kernel hangs after "Now booting the kernel"."
>>>>
>>>> cheers,
>>>> -Ameet
>>>>
>>>> Raja Chidambaram wrote:
>>>>
>>>>
>>>>> Hi all,
>>>>> We are working on customized board with amcc 440SPe
>>>>> processor & xilinx System Ace controller. The System
>>>>> Ace controller is connected to compact flash driver.
>>>>>
>>>>> We use u-boot 1.2 as bootloader & linux kernel
>>>>> 2.6.16-2.
>>>>>
>>>>> On the process the u-boot is able to detect compact
>>>>> flash through Xilinx SystemAce controller & able to
>>>>> load the kernel image into compact flash.But when the
>>>>> linux boot's up it not able to detect the System Ace
>>>>> controller or compact flash.
>>>>>
>>>>> Note:we need to have the root file system in compact
>>>>> flash.
>>>>>
>>>>> Is their any drivers available for SystemAce
>>>>> controller on linux 2.6,if their how to get it.please
>>>>> help me in this
>>>>> with regards
>>>>> raja
>>>>>
>>>>>
>>>>>
>>>>> __________________________________________________
>>>>> Do You Yahoo!?
>>>>> Tired of spam? Yahoo! Mail has the best spam protection around
>>>>> http://mail.yahoo.com _______________________________________________
>>>>> Linuxppc-embedded mailing list
>>>>> Linuxppc-embedded@ozlabs.org
>>>>> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>>>>>
>>>>>
>>>>>
>>>> _______________________________________________
>>>> Linuxppc-embedded mailing list
>>>> Linuxppc-embedded@ozlabs.org
>>>> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>>>>
>>>>
>>>>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
>
[-- Attachment #2: Type: text/html, Size: 5974 bytes --]
next prev parent reply other threads:[~2006-08-22 15:08 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-24 12:14 RE:SystemAce Driver Raja Chidambaram
2006-07-24 12:34 ` SystemAce Driver Ameet Patil
2006-08-09 15:06 ` sudheer
2006-08-09 20:09 ` Frank D Lombardo
2006-08-10 3:06 ` sudheer
2006-08-11 9:34 ` Ameet Patil
2006-08-11 10:42 ` sudheer
2006-08-22 15:07 ` sudheer [this message]
2006-08-30 14:12 ` could not access the address in linux-System ace driver sudheer
2006-09-07 9:05 ` SystemAce Driver sudheer
2006-09-08 15:46 ` Ameet Patil
2006-09-09 0:04 ` a sudheer
2006-07-24 12:36 ` Driver Ming Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44EB1DC2.5070307@gmail.com \
--to=urwithsudheer@gmail.com \
--cc=linuxppc-embedded@ozlabs.org \
--cc=raja_chidambaram82@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).