From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.mdivac.com (adsl-68-253-104-89.dsl.bcvloh.ameritech.net [68.253.104.89]) by ozlabs.org (Postfix) with ESMTP id 9186D67C2B for ; Fri, 25 Aug 2006 05:27:26 +1000 (EST) Message-ID: <44EDFD9C.4010003@mdivac.com> Date: Thu, 24 Aug 2006 15:27:24 -0400 From: Frank D Lombardo MIME-Version: 1.0 To: Wade Maxfield Subject: Re: MontaVista 2.6 Kernel support for Xilinx ML40x References: <45a1b53e0608240836l52ed51b5u309e31dd8486cc5b@mail.gmail.com> <44EDD947.3000105@xilinx.com> <45a1b53e0608241057j4ebe519drd1e431a2275ccdde@mail.gmail.com> In-Reply-To: <45a1b53e0608241057j4ebe519drd1e431a2275ccdde@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Cc: ppc List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , The ml403 reference design has several evaluation cores: opb_uart16550, opb_iic and opb_ethernet. They seem to time-out after about eight hours. Frank Wade Maxfield wrote: > Good question. How long before lockup? The only core that should be > licensed is the ethernet, and I know it was sysgened on a system with > a license. This is the Xilinx reference design for the ml403 board. > > > On 8/24/06, *Peter Ryser* > wrote: > > Wade, > > are you sure that you did not build your hardware with evaluation > cores of the licenses? If you are using the evaluation licenses > the hardware (FPGA design) will stop working after a certain > amount of time and you will see a lock-up. > > - Peter > > > Wade Maxfield wrote: > > I've got the LSP, and have booted it on the ML40X. > > In my opinion it is currently unstable, but that is my opinion. > I've not been able to keep it powered up for 24 hours without it > locking up on the RS232 serial terminal. Also, running updatedb > over nfs causes it to abort with a kernel panic, although that > might be an interraction with the nfs server. (Although even if > the nfs server dies (which it did not), I don't expect a kernel > panic). > > I have had it run over 6 hours without issue, so I expect > subtle memory leaks, not serious problems. > > > > On 8/24/06, *Claus Gindhart* < claus.gindhart@kontron.com > > wrote: > > Frank, > > due to my understanding of the GPL (and i have already > invested some time > in understanding the various flavours of open source > licences), you should > contact Montavista, and ask them for the sources. > > This board adaption is derivative work of the GPL Kernel, so > the result of > this work also falls under the GPL, and has to be made freely > available > under the terms of the GPL. > > -- > Mit freundlichen Gruessen / Best regards > > Claus Gindhart > SW R&D > Kontron Modular Computers > phone :++49 (0)8341-803-374 > mailto:claus.gindhart@kontron-modular.com > > http://www.kontron.com > > -----BEGIN GEEK CODE BLOCK----- > Version: 3.1 > GU d- s++:>++:+ a+ C++$ !U !P L++>$ E-- W+(-) N- o? > K? w !O !M V !PS PE- Y+ PGP+ t 5? X R* tv- b+ DI+++ > D-- G e++> h--- !r x+++ > ------END GEEK CODE BLOCK------ > > > -----Original Message----- > From: > linuxppc-embedded-bounces+claus.gindhart=kontron.com@ozlabs.org > > [mailto: > linuxppc-embedded-bounces+claus.gindhart=kontron.com@ozlabs.org > ] > On Behalf Of Frank D Lombardo > Sent: Donnerstag, 24. August 2006 15:59 > To: linuxppc-embedded@ozlabs.org > > Subject: MontaVista 2.6 Kernel support for Xilinx ML40x > > > I noticed that MontaVista now has their Pro 4.0 version (2.6 > Kernel) > available for the Xilinx ML40x series of boards. I would > assume that > means driver support for at least most of the hardware on the > boards. > Is this code that should be freely available? How would one > get a copy > of these drivers? I am interested in drivers for the ML403. > > Thanks, > Frank > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > > > ------------------------------------------------------------------------ > > _______________________________________________ Linuxppc-embedded > mailing list Linuxppc-embedded@ozlabs.org > > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > > ------------------------------------------------------------------------ > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded