From: sudheer <urwithsudheer@gmail.com>
To: Ameet Patil <ammubhai@gmail.com>
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: SystemAce Driver.
Date: Thu, 07 Sep 2006 14:35:48 +0530 [thread overview]
Message-ID: <44FFE0EC.6010603@gmail.com> (raw)
In-Reply-To: <44DC4F34.1070308@gmail.com>
Hi Ameet Patil
Ameet Patil wrote:
> Hi Sudheer,
> Frank has already answered your questions. If you have any problems
> with the SysAce patch... do let me know. I have written a small
> tutorial here if it helps...
I have used your SystemAce patch with linux-2.6.16-2. The kernel gets
loaded with the ace module and is fine.
I want the driver in polling mode. So i have commented few lines related
to interrupt in the adapter.c file- xsysace_init function.
When i give the fdisk command, it gives few errors and then enters to
the fdisk commad promt. It prints the partitions, etc.
But when i try to quit from the fdisk, it hangs. I am not able to
complete the request properly (i guess in xsa_thread function in
adapter.c file)
The dump is as follows:
SystemACE: Error 1 when reading sector 60.
end_request: I/O error, dev xsa, sector 56
SystemACE: Error 1351 when reading sector 62.
end_request: I/O error, dev xsa, sector 56
Command (m for help): p
Disk /dev/xsysace: 512 MB, 512483328 bytes
16 heads, 62 sectors/track, 1009 cylinders
Units = cylinders of 992 * 512 = 507904 bytes
Device Boot Start End Blocks Id System
/dev/xsysace1 1 1009 500433 6 FAT16
Command (m for help): q
-------
The fdisk enters into xsysace_ioctl function but no commands are
implemented in the ioctl function and returns an error.
Please help me in this issue and let me know if any other details required.
Thanks
Sudheer
>
> http://linux.get2knowmore.com
>
>
> -Ameet
>
> sudheer wrote:
>> Hello Ameet Patil
>>
>> I am looking for linux kernel source 2.6.16 with system ace
>> controller support. I downloaded the linux-2.6.16 and linux-2.6.17-1
>> source from kernel.org but could not find any files related to system
>> ace controller ( No xilinx_sysace directory in drivers/block/) . I
>> have checked penguinppc.org also but could not get it.
>>
>> Can you please send to me the link where i could download the
>> linuxppc-2.6.16 source with system ace support.
>>
>> Thanks & Regards
>> Sudheer
>>
>> Ameet Patil wrote:
>>> Hi Raja,
>>> I have ported the Xilinx System ACE driver to 2.6 kernel. Find
>>> the latest one here:
>>> http://www.cs.york.ac.uk/rtslab/demos/amos/xupv2pro/patches/linuxppc-2.6.17.1-sysace-1.2.patch
>>>
>>>
>>> NOTE: this patch wouldn't work if you are using the TEMAC driver. In
>>> which case use the -after-TEMAC patch found in the patches folder
>>> above.
>>>
>>> Check the following discussions (threads) for more details:
>>> 1. "Xilinx SystemACE driver for 2.6"
>>> 2. "Xilinx BSP for linux 2.6"
>>> 3. "Kernel hangs after "Now booting the kernel"."
>>>
>>> cheers,
>>> -Ameet
>>>
>>> Raja Chidambaram wrote:
>>>
>>>> Hi all,
>>>> We are working on customized board with amcc 440SPe
>>>> processor & xilinx System Ace controller. The System
>>>> Ace controller is connected to compact flash driver.
>>>>
>>>> We use u-boot 1.2 as bootloader & linux kernel
>>>> 2.6.16-2.
>>>>
>>>> On the process the u-boot is able to detect compact
>>>> flash through Xilinx SystemAce controller & able to
>>>> load the kernel image into compact flash.But when the
>>>> linux boot's up it not able to detect the System Ace
>>>> controller or compact flash.
>>>>
>>>> Note:we need to have the root file system in compact
>>>> flash.
>>>>
>>>> Is their any drivers available for SystemAce
>>>> controller on linux 2.6,if their how to get it.please
>>>> help me in this
>>>> with regards
>>>> raja
>>>>
>>>>
>>>>
>>>> __________________________________________________
>>>> Do You Yahoo!?
>>>> Tired of spam? Yahoo! Mail has the best spam protection around
>>>> http://mail.yahoo.com _______________________________________________
>>>> Linuxppc-embedded mailing list
>>>> Linuxppc-embedded@ozlabs.org
>>>> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>>>>
>>>>
>>> _______________________________________________
>>> Linuxppc-embedded mailing list
>>> Linuxppc-embedded@ozlabs.org
>>> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>>>
>>>
>>
>
next prev parent reply other threads:[~2006-09-07 9:05 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-24 12:14 RE:SystemAce Driver Raja Chidambaram
2006-07-24 12:34 ` SystemAce Driver Ameet Patil
2006-08-09 15:06 ` sudheer
2006-08-09 20:09 ` Frank D Lombardo
2006-08-10 3:06 ` sudheer
2006-08-11 9:34 ` Ameet Patil
2006-08-11 10:42 ` sudheer
2006-08-22 15:07 ` sudheer
2006-08-30 14:12 ` could not access the address in linux-System ace driver sudheer
2006-09-07 9:05 ` sudheer [this message]
2006-09-08 15:46 ` SystemAce Driver Ameet Patil
2006-09-09 0:04 ` a sudheer
2006-07-24 12:36 ` Driver Ming Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44FFE0EC.6010603@gmail.com \
--to=urwithsudheer@gmail.com \
--cc=ammubhai@gmail.com \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).