From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from amanaus.varma-el.com (amanaus.varma-el.com [195.144.240.154]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "mail.varma-el.com", Issuer "mail.varma-el.com" (not verified)) by ozlabs.org (Postfix) with ESMTP id B16C267CEE for ; Fri, 27 Oct 2006 17:29:20 +1000 (EST) Message-ID: <4541B547.1010908@varma-el.com> Date: Fri, 27 Oct 2006 11:29:11 +0400 From: Andrey Volkov MIME-Version: 1.0 To: RPo Subject: Re: MPC5200 (Board: PM520) I2C Problem References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1 Cc: "'linuxppc-embedded@ozlabs.org'" List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello Rainer RPo wrote: > Hi, > > I'm currently using the MPC5200 based board "PM520" and > want to access the I2C bus. To do so, I attached a PCF8574P > to the bus. But I was not successful in setting the outputs > of this IC. <...snip..> Revision of MPC5200? (third string engraved on the MPC) If L25R then check this doco: http://www.freescale.com/files/32bit/doc/errata/MPC5200E.pdf (if be short - I2C didn't work on this revision chips) -- Regards Andrey Volkov