From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from de01egw01.freescale.net (de01egw01.freescale.net [192.88.165.102]) by ozlabs.org (Postfix) with ESMTP id 096F0DE01D for ; Wed, 24 Jan 2007 03:33:00 +1100 (EST) Message-ID: <45B638B5.70901@freescale.com> Date: Tue, 23 Jan 2007 10:32:53 -0600 From: Timur Tabi MIME-Version: 1.0 To: Benjamin Zores Subject: Re: [MPC8349ITX] USB Init with PPC arch References: <20070122181027.89187533.benjamin.zores@alcatel-lucent.fr> In-Reply-To: <20070122181027.89187533.benjamin.zores@alcatel-lucent.fr> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Cc: linuxppc-embedded@ozlabs.org List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Benjamin Zores wrote: > Hi, > > This question is mainly intended to Freescale's MPC8349ITX board maintainer > but the issue/resolution is probably the same for other boards. I'm the maintainer, although I don't think I can help you with this specific problem. > I'm trying to boot the MPC8349ITX card with Linux 2.6.19 using old PPC > architecture (and not the new PowerPC one). > I've ported patches from Freescale's BSP from 2.6.13 to 2.6.19 and > it works pretty well but USB doesn't init properly. > > Switching to PowerPC arch of course works fine and USB is well inited > but due to other feature i use that only exist on PPC right now, I can't > make use of it. What feature is that? I would think it would be easier to port that feature to the powerpc architecture, then it would be to port ITX support to the ppc architecture. -- Timur Tabi Linux Kernel Developer @ Freescale