From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from otrok.post.sk (otrok.post.sk [85.248.69.172]) by ozlabs.org (Postfix) with ESMTP id 6962CDDDE9 for ; Fri, 2 Feb 2007 22:38:53 +1100 (EST) Message-ID: <45C31795.000001.05998@kamasutra> Mime-Version: 1.0 Content-Type: Text/Plain; Charset = "ISO-8859-2" From: Ladislav Klenovic To: Subject: Re: Re: SMC as UART problem on mpc8xx Date: 02 Feb 2007 11:51:01 +0100 (CET) List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , > On 01 Feb 2007 17:10:31 +0100 (CET) > a b wrote: > > > Hi, > > I have mpc8xx where I would like the following configuration: > > - SCC1 as system console (works fine) > > - SMC1-2 as UART (doesn\\\'t work) > > > > I use linux 2.6.16.20 with backward patch from linux-2.6.19.2 for SMCs. My only problem is > > that even I can see cpm_uart registered for IRQ 20 (for SMC1) I never get interrupt even > > I do e.g. \\\"echo 123 > /dev/ttyCPM\\\". > > > > here is a short extract from /proc/interrupts: > > 20: 0 CPM Edge cpm_uart <--SMC1 > > 21: 7546 CPM Edge SPI > > 46: 20 CPM Edge cpm_uart <-- SCC1 (console) > > > > here is a short extract from /proc/tty/driver/ttyCPM: > > serinfo:1.0 driver revision: > > 0: uart:CPM UART mmio:0xFFF00A80 irq:20 tx:14 rx:0 RTS|CTS|DTR|DSR|CD > > 1: uart:CPM UART mmio:0xFFF00A90 irq:19 tx:0 rx:0 CTS|DSR|CD > > 2: uart:CPM UART mmio:0xFFF00A00 irq:46 tx:3038 rx:46 RTS|CTS|DTR|DSR|CD > > > > Can anybody help me to get SMCs working? > > > > > Check IO ports? IIRC, in 8xx some SoC devices could not work simultaneously because they > share some GPIO pins. In any case, if something does not function with CPM UART, IOports stuff is the first thing to check. > > -- > Sincerely, > Vitaly > Hi, thnx for hint, you were right, problem was in I/O port configuration. I am a bit wondered why is B port for mpc8xx not configured in 2.16.19.2. Or is it configured somewhere else? I especially miss this part of code in cpm_uart_cpm1.c: void smc1_lineif(struct uart_cpm_port *pinfo){ ... #elif defined (CONFIG_MPC86XADS) if (!pinfo->is_portb) { cp->cp_pbpar |= iobits; cp->cp_pbdir &= ~iobits; cp->cp_pbodr &= ~iobits; } else { ((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits; ((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits; ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits; } #endif ... } Regards, Ladislav. __________ Mobilné telefóny v slovenskej premiére a najaktuálnejšie informácie - http://mobil.sme.sk/