From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from az33egw01.freescale.net (az33egw01.freescale.net [192.88.158.102]) by ozlabs.org (Postfix) with ESMTP id DBD2CDDE24 for ; Mon, 5 Feb 2007 20:08:52 +1100 (EST) Received: from az33smr02.freescale.net (az33smr02.freescale.net [10.64.34.200]) by az33egw01.freescale.net (8.12.11/az33egw01) with ESMTP id l1598irI012278 for ; Mon, 5 Feb 2007 02:08:45 -0700 (MST) Received: from zch01exm20.fsl.freescale.net (zch01exm20.ap.freescale.net [10.192.129.204]) by az33smr02.freescale.net (8.13.1/8.13.0) with ESMTP id l1598gY8012914 for ; Mon, 5 Feb 2007 03:08:43 -0600 (CST) Message-ID: <45C6F464.9010508@freescale.com> Date: Mon, 05 Feb 2007 17:09:56 +0800 From: Li Yang MIME-Version: 1.0 To: Paul Subject: [PATCH 1/3] add USB setup code for 8349emds PB Content-Type: text/plain; charset=ISO-8859-1; format=flowed Cc: linuxppc-dev@ozlabs.org List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Signed-off-by: Li Yang --- arch/powerpc/platforms/83xx/Kconfig | 4 ++ arch/powerpc/platforms/83xx/mpc834x_sys.c | 77 +++++++++++++++++++++++++++++ arch/powerpc/platforms/83xx/mpc834x_sys.h | 23 +++++++++ 3 files changed, 104 insertions(+), 0 deletions(-) diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index edcd5b8..5371645 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -59,4 +59,8 @@ config PPC_MPC836x select PPC_INDIRECT_PCI default y if MPC8360E_PB +config 834x_USB_SUPPORT + bool + default y if MPC834x_SYS && (USB || USB_GADGET) + endmenu diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c index 80b735a..9b6abe9 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.c @@ -35,14 +35,69 @@ #include #include #include +#include #include "mpc83xx.h" +#include "mpc834x_sys.h" #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif +static volatile u8 *bcsr_regs = NULL; + +#ifdef CONFIG_834x_USB_SUPPORT +/* Note: This is only for PB, not for PB+PIB + * On PB only port0 is connected using ULPI */ +static int mpc834x_usb_cfg(void) +{ + unsigned long sccr, sicrl; + volatile unsigned long *p; + unsigned long __iomem *immap; + struct device_node *np = NULL; + int port0_is_dr = 0; + + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL) + port0_is_dr = 1; + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){ + if (port0_is_dr) { + printk(KERN_WARNING + "There is only one USB port on PB board! \n"); + return -1; + } else if (!port0_is_dr) + /* No usb port enabled */ + return -1; + } + + immap = ioremap(get_immrbase(), 0x100000); + + /* Configure clock */ + p = (volatile unsigned long *)((u32)immap + MPC83XX_SCCR_OFFS); + sccr = *p; + if (port0_is_dr) + sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + else + sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ + *p = sccr; + + /* Configure Pin */ + p = (volatile unsigned long *)((u32)immap + MPC83XX_SICRL_OFFS); + sicrl = *p; + /* set port0 only */ + if (port0_is_dr) + sicrl |= MPC83XX_SICRL_USB0; + else + sicrl &= ~(MPC83XX_SICRL_USB0); + *p = sicrl; + + iounmap(immap); + return 0; +} + +#endif /* CONFIG_834x_USB_SUPPORT */ + + /* ************************************************************************ * * Setup the architecture @@ -65,6 +120,7 @@ static void __init mpc834x_sys_setup_arch(void) loops_per_jiffy = 50000000 / HZ; of_node_put(np); } + #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); @@ -72,6 +128,27 @@ static void __init mpc834x_sys_setup_arch(void) ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif +#ifdef CONFIG_834x_USB_SUPPORT + mpc834x_usb_cfg(); + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != 0) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start + 1); + of_node_put(np); + } + + /* + * if SYS board is plug into PIB board, + * force to use the PHY on SYS board + * */ + if ((bcsr_regs != NULL) && !(bcsr_regs[5] & BCSR5_INT_USB)) + bcsr_regs[5] |= BCSR5_INT_USB; +#endif + #ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS; #else diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.h b/arch/powerpc/platforms/83xx/mpc834x_sys.h index 7d5bbef..c2786fe 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.h +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.h @@ -20,4 +20,27 @@ #define PIRQC MPC83xx_IRQ_EXT6 #define PIRQD MPC83xx_IRQ_EXT7 +#define BCSR_PHYS_ADDR ((uint)0xf8000000) +#define BCSR_SIZE ((uint)(32 * 1024)) + +#define BCSR5_OFF 0x05 +#define BCSR5_INT_USB 0x02 + +#define MPC83XX_SCCR_OFFS 0xA08 +#define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000 +#define MPC83XX_SCCR_USB_MPHCM_01 0x00400000 +#define MPC83XX_SCCR_USB_MPHCM_10 0x00800000 +#define MPC83XX_SCCR_USB_DRCM_11 0x00300000 +#define MPC83XX_SCCR_USB_DRCM_01 0x00100000 +#define MPC83XX_SCCR_USB_DRCM_10 0x00200000 + +/* system i/o configuration register low */ +#define MPC83XX_SICRL_OFFS 0x114 +#define MPC83XX_SICRL_USB0 0x40000000 +#define MPC83XX_SICRL_USB1 0x20000000 + +/* system i/o configuration register high */ +#define MPC83XX_SICRH_OFFS 0x118 +#define MPC83XX_SICRH_USB_UTMI 0x00020000 + #endif /* __MACH_MPC83XX_SYS_H__ */